absolutely not
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.
In the UK, you cannot put a 5 amp fuse in a 3 amp plug. The general rule of thumb is that you should use like for like.
15 AMP
The fuse for the radio in a 2000 Dodge Avenger is 10 amp.
The difference between fuses is the current that they are designed to support. A fuse is intended as a safety measure to protect against overload. A 3 amp fuse should burn out if more than 3 amps is run through it, with some allowance for standard variance. A 13 amp fuse would burn out with greater than 13 amps. It is always a bad idea to use a fuse bigger than you need, because if your component is designed for a 3 amp fuse and you use a 13 amp fuse, there is a good chance you could damage your component with too much amperage because the fuse would not burn out at 3 amps, as was intended.
Yes. You put a bigger fuse and you will melt the wire and cause a fire hazard.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
Yes, as long as the fuse is able to be inserted into the fuse holder it will work.
Fuse # 3 - 25 amp - interior fuse panel
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
yes but its not recomended