The difference between fuses is the current that they are designed to support. A fuse is intended as a safety measure to protect against overload. A 3 amp fuse should burn out if more than 3 amps is run through it, with some allowance for standard variance. A 13 amp fuse would burn out with greater than 13 amps. It is always a bad idea to use a fuse bigger than you need, because if your component is designed for a 3 amp fuse and you use a 13 amp fuse, there is a good chance you could damage your component with too much amperage because the fuse would not burn out at 3 amps, as was intended.
The 13 amp fuse with blow at the lower rate to the 15 amp fuse. And At 15 amp the motor is normally more powerful - check the wattage used in both
absolutely not
In the YUK an electric kettle has a 13 amp fuse., together with a 250 voltage. However, in the USA the voltage is lower and so ther fuse amperage may be different.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
If you do that the likelihood is that you will blow the 3A fuse quickly. There is a reason why the current fuse is what it is, because it is expecting currents around 80% of 13 A or around 10 A.
Fuse #13 or the 40 amp itm is the only forty amp
Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown).
13 amp breaker. A fuse and circuit breaker perform the exact same function so they should be the exact same size. They protect the wiring within a circuit from overheating and catching on fire. A 13 amp breaker is a superior product that has a good chance of operating between 13 and 13½ amps, while a fuse might not blow until the current reaches 15 amps.
If the fuse thsat has blown is a 3 amp, you should only replace it with a 3 amp fuse, which is good for appliances up to 700 watts (In the UK, on 240 volts). Do not replace a 3 amp fuse with a 13 amp fuse, it gives much less protection. If you replace a 13 amp fuse with a 3 amp fuse, the 3 amp will likely blow, since the 13 amp fuse should be protecting a powerful appliance such as a heater, between 2000 watts and 3000 watts.
Sure.If you want a fire, that is!AnswerNo. A 30A will cook the wire before it pops.
Never. The wiring would not support that much current.
Your telling us ask us anything you just put stupid questions