EBCM stands for electronic brake control module. The purpose of this is to sense if the wheels are going lock-up during braking, and then make adjustments accordingly. If this switch fails, then your anti-lock braking system will not work properly.
Need to know the year.
There is no such thing as a 'traction control sensor'.But, If you are referring to the "Traction Control System", there are Many components that make up the Traction Control System.The heart of Traction Control System is the "EBCM" (Electric Brake Control Module). The EBCM monitors the wheel speed sensors for Drive Wheel Slip. When drive wheel slip is noted while the brake is not applied, the EBCM will enter "Traction Control Mode".When vehicle enters Traction Control Mode, the EBCM sends a request to the "PCM" (Power Control Module) to reduce the amount of torque to the drive wheels. If the engine torque reduction does not eliminate drive wheel slip, the EBCM will actively apply the drive wheel brakes.The EBCM in the 05' Buick Terraza is located on the "BPMV" (Brake Pressure Modulator Valve). In other words, the EBCM is mounted on the Antilock Brake Controller.
Labor at parts at a local GMC dealership was $786.00.
Most all part stores sell them.
The EBCM on a 2001 Tahoe is located underneath the SUV on the driver's side, directly under the driver's seat, bolted into the frame. This is not an easy job to take out. To see the screws that hold it in, you really need to have it on a lift.
on the driver side, on the frame rails with 4 screws holding it
There is no brake fuse on the 2003 Venture. there is a EBCM/EBTCM. This module controls the ABS in your vehicle.
Just BELOW the battery box on the drivers side. It will have a small plastic box around it to pertec it.
The GTP does not have one it has Magnasteer which is all integrated in the steering rack & pinion which is controlled by the EBCM.
its related the the abs system. (anti lock brakes) its an ebcm, electronic brake control module.
Located on the frame under the truck, close to the driver side.
THE TRACTION CONTROL SENSOR IS INTERGRATED INTO THE ABS CONTROL MODULE. EBCM (ELECTRONIC BRAKE CONTROL MODULE). THIS IS LOCATED ON THE DRIVER FRONT INNER FENDER WELL. THIS UNIT HAS STEEL LINES AND ELECTRICAL WIRE COMING OUT OF IT....WHEN THIS MESSES UP ABS LIGHT AND TRACTION CONTROL DOES NOT WORK.. DEALER PRICE ON EBCM IS $850.00 PLUS LABOR!