Current snaps back to zero very rapidly
gunn diode is transfered electron device & PIN diode is semiconductor device
whether we know that p-n diode is real diode. But still in case of semeconductor we see then silics is real diode.
Bulk resistance of diode depends on how it is biased. The bulk resistance of a diode is the approximate resistance of the diode when it is forward biased.
Another diode with similar specifications.
No.
This is not possible. You must replace the diode.
Diode or module??? the module is under the dash straight back from the gas pedal..
A: Refers two two diodes connected as it say back to back for gates applications.
Like a normal diode............. unless it includes a "back biased" diode to prevent conduction in this mode as is common in zener diodes rated at about 10 volts or more, then it acts as an open circuit.
That depends on the zener voltage rating:"low voltage" zeners are just a simple single diode, the zener diode"high voltage" zeners contain 2 back to back diodes in one package, the zener diode and an ordinary diode that is reverse biased when the zener diode is forward biased to block forward conduction of the zener and protect it from overcurrent damage if installed backwards by mistakeThus in "low voltage" zeners when forward biased they will have a normal diode drop (e.g. 0.7V), but "high voltage" zeners when "forward biased" they will act open due to the reverse biased blocking/protection diode in series with the zener.
Current snaps back to zero very rapidly
The symbol for the esaki diode, also known as the tunnel diode, is similar to the zener diode, except that the two stems on the end of the cathode both point back towards the anode, and they are at 90 degrees instead of 45 degrees. For more information, and a picture, please see the related link below.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
If diode is connected in series then current will flow only in one direction. ie. Current flow occurs only when diode is forward biased. ANSWER: It depends are the diodes are connected in series if they are back to back no current will flow if connected in the forward conduction mode then they will conduct.
diode is a bipolar device and transister is a three terminal device a diode will conduct any time there is a positive voltage from cathode[-] to anode[+] following an exponetial curve of the diode. a transistor can control the same exponential curves by a voltage applied to the base.
yes, diode can be used as rectifier diode to convert ac to dc