pawl
a breaker bar is longer then a ratchet so you leverage
By a ratchet system, a system that engages only while roating in one direction but doesn't in the opposite one. Such as ratchet handles.
noun1. A mechanism consisting of a pawl that engages the sloping teeth of a wheel or bar, permitting motion in one direction only.2. The pawl, wheel, or bar of this mechanism.verb-intransitive1. To increase or decrease by increments.verb-transitive1. To cause to increase or decrease by increments: "Some companies . . . may make things worse if they seek to ratchet down their medical expenses by limiting benefits for psychological or psychiatric care" ( Newsweek).
There are many backup and fail-safe devices however the main is a ratchet style lock. The bar can only be moved one way (downwards) not back up. In the station the ratchet is released and the bar will raise.
there should be a hole on the tensioner bar that fits a 3/8 ratchet. using the ratchet rotate the bar counter-clockwise(on a 2000 mustang) to loosen the belt.
There is a square opening on the front of the tensioner that fit a 3/8" ratchet. Place the ratchet in the opening and crank down toward the ground. You may need to slip a longer bar over the ratchet to get it down.
36 mm socket and a long ratchet or bar.
Nope. Just a long 1/2" drive ratchet or breaker bar. Use a cheater pipe on the ratchet.
A positive locking ratchet mechanism is a device that allows rotation in one direction while preventing it in the opposite direction, ensuring secure positioning. It typically consists of a ratchet wheel with teeth and a pawl that engages with these teeth to lock the wheel in place. This mechanism is commonly used in tools like socket wrenches and ratchet straps, providing reliable torque and preventing unintended movement. Its design enhances safety and efficiency by maintaining the desired position under load.
Scope of business is the different activities a business engages in. This is stuff like if a restaurant also caters, or has a bar located in it.
1/2"breaker bar for belt tensioner,10mmsocket ,ratchet
release the tensioner with a 1/2 in braker bar or ratchet and work the belt out.