try adjusting the ignition timing(or getting a mechanic to do it)
There is usually a solenoid that boosts the idle when A/C is turned on. If the car stalls when solenoid disengaged; the curb idle adjustment is off. Find the screw and give it a half-turn CW. Or, sometimes the end of the solenoid is the curb-idle adjustment . Put a wrench on it and try giving It a half-turn clock wise.
timing should be set with chip disabled(curb idle)
Carb needs curb idle adjusted or rebuild.
its in the troudle fuel injection body if its factory there should be a white plug in it. The computer controls it. It has a little valvue in it that moves in and out for more air or less air. That's gives curb idle speed.
The computer in your vehicle controls idle (base and curb). When the battery was disconnected the computer lost memory of the set idle. The car needs to re-learn the idle specs, sometimes can be done by driving for around 15-20 minutes. If not you will need to see a mitsu dealer and have a multi scanner hooked up to reset the idle.
disconnect vacumn advance hose, bring down to curb idle, connect timing light to the # 1 spark plug wire, loosen distibutor and adjust as necessary
A yellow curb means no parking along that curb.
Curb-To-Curb Width: 14.6m (47.9ft), Out-to-Out Width: 28.0m (91.9ft).
She kicked him to the curb. The car was parked just along side the curb. His mom stubbed her toe on the curb.
just a curb
Curb Weight AT means the curb weight of the vehicle with an Automatic Transmission installed; Curb Weight MT means the curb weight of the vehicle with a Manual Transmission installed.