An EXO switch stands for EXternally Operated disconnect switch.
An EXO switch stands for EXternally Operated disconnect switch.
There should be a switch on the light itself to disconnect the sensor.
It allow you to disconnect power to an electrical device with the flip of a switch.
pragnat tips
Disconnect the battery. Disconnect the air bag system. Remove the steering wheel. The dimmer switch can now be replaced.
because when the battery is connected it is like an on and off switch with the switch in the on position!
Disconnect the negative battery cable. Remove steering column covers Disconnect the electrical connector from the ignition switch Remove the screw retaining the switch to the steering column
Disconnect the battery. Remove the plastic trim around the steering column. Remove the screws that hold the turn signal switch to the column. Disconnect the switch from the wiring and remove it.
Disconnect it (that's what a switch normally does).
Disconnect the negative cable. Remove any screw from the switch. Slide the switch from the dash. Remove the switch and insert the new switch.
The backup light switch is located on the left side of the transmission. Disconnect the switch connectors, then unscrew the switch.