The current which changes it direction after every half cycle is called alternating current(A.C)
or
Alternating current which produced by voltage source whose polarity keeps on reversing with time.
By Shahnam qadeer
50 cycles
Weston frequency meter is a type of electromechanical instrument used for measuring the frequency of an alternating current (AC) power system. It typically consists of a moving-coil meter mechanism that reacts to the frequency of the AC signal to provide a reading on its scale. Weston frequency meters are used in various applications to monitor and analyze the frequency of electrical systems.
A cycloconverter or a cycloinverter converts an AC waveform, such as the mains supply, to another AC waveform of a lower frequency, synthesizing the output waveform from segments of the AC supply without an intermediate direct-current link.
Actually the amplitude depends on your modulator by which you generated your signal you can pick any amplitude you want but here is the formula for frequency modulated signal: Ac here decide the amplitude of the signal and you can see that it is not related to the frequency component of your signal.
Amplitude of the (high frequency) Carrier signal is varied with respect to low frequency of message signal is called amplitude modulation. Frequency of the carrier signal is varied with respect to low frequency of message signal is called frequency modulation.
the low frequency signal which is nothing but the message signalNeither. The envelope will be that of the difference beat frequency. To get the envelope to follow the low frequency input signal you need to mix (multiply) the two signals, not add them.
The signal with a frequency of 200Hz has a wider bandwidth compared to a signal with a frequency of 100Hz. Bandwidth is determined by the range of frequencies present in a signal, so a higher-frequency signal will have more frequency components and thus a wider bandwidth.
ac
Mix it with a local oscillator whose frequency is (the IF frequency) away from the frequency of the FM signal you're interested in.
frequency of AC current in egyptis 50 c/s
Ohms, resistance in an inductor increases as the frequency of the AC signal increases, this "artificial resistance" is called impedence, and it is measured in ohms
to shift the frequency of information signal ,at the frequency domain to a higher frequency ...so the information can be transmitted to the receiver.