A cycloconverter or a cycloinverter converts an AC waveform, such as the mains supply, to another AC waveform of a lower frequency, synthesizing the output waveform from segments of the AC supply without an intermediate direct-current link.
Cycloconverter is a ac to low frequency ac converter.which convert ac to low freq.ac with help of scr.
Cycloconverter is a ac to low frequency ac converter.which convert ac to low freq.ac with help of scr.
For decrease the rectifier number
At first, there was cycloconverter with thyristors, then matrix converter with IGBT...
u refer cycloconverter and matrix converter
Converter is AC to DC. Inverter is DC to AC
1. Induction Heating 2. Speed control of high power ac drives 3.Static VAR compensation 4.For converting variable spee alternator voltage to constant frequency output voltage for use as power supply in aircrafts.
Step Down cycloconverters generally Lower the input frequency to a desired value.This has many applications such as activities requiring low frequency namely electric traction systems where simple DC commutating machines are provided with frequencies of order of 16 hz.
The types of dc-dc converters are the ones with isolation and the ones without isolation. Isolation makes sence only into very high or very small ratios of Vin / Vout. Vin is the Voltage input and Vout is the voltage output of the converter. The isolation is applied between input and output circuits by using a transformer. The main types of converters are buck,boost and buck-boost (without isolation) and Cuk, Flyback and Forward (with isolation).
To increase the frequency of AC supply by increase the speed of the prime mover used for the alternator, the prime mover speed can be vary by stream input from the boiler is varied (or) using cycloconverter to change ie.. to increase the frequency of the AC supply.
I'm going to assume you're referring to the frequency of AC (Alternating Current) and I'm going to assume that you're asking because you have some device that wants 50Hz and you are faced with a 60Hz supply. That is a lot of assumptions but you didn't give a lot of information.It is possible but you'd have to convert the 60Hz AC to DC then back to 50Hz AC. It would involve some expensive equipment. I'm not aware of a one-box solution but you could piece together a system with an AC-DC battery charger, adequate storage batteries, and a DC-AC power inverter. Depending on your application, you might be better off replacing the equipment that won't run on 60Hz.Before running off and spending your money on this, check the labels for your equipment. The label on my laptop power supply says it accepts 110vac-240vac at 50/60Hz. If you're going to run into problems it would most likely be with electric motors.