It is what the brake rotor fits onto.
Well its a wheel bearing hub assembly that you need to buy. Autozone has a Timken/Wheel Bearning/Hub Assembly-front its $79.99 and they have the Duralast/Wheel Bearing/Hub Assembly-Front $51.99
The front wheel bearing is a sealed unit with the wheel hub - replace the hub and wheel bearing unit. Remove the four bolts from the rear of the steering knuckle that connect to the hub bearing unit.
With a Wheel Bearing Hub Assembly, you might get both the wheel bearing and the hub assembly. Sometimes, especially with FWD vehicles, the front hubs will not have the bearing with them but the rear hub assembly will. Most part manufacturers will follow what ever the auto company recommends.
Front hub/wheel bearing torque is 190-210Nm.
To replace the front wheel bearing on a Mazda Tribute, first, lift the vehicle and remove the front wheel. Next, disconnect the brake caliper and rotor, then remove the hub assembly by unbolting it from the steering knuckle. Once the hub is removed, press out the old bearing using a bearing puller, and press in the new bearing. Reassemble the hub, rotor, and caliper, then reinstall the wheel and lower the vehicle.
The wheel bearing is part of the hub assy. it the part that the wheel attaches to. If you take your tire off you can see a round piece with 5 suds, that the hub assy. and the bearing is behind it.
To change the front wheel bearing on a 2001 Hyundai Sonata, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor to access the wheel hub assembly. Remove the hub assembly by taking out the retaining bolts and using a hub puller if necessary. Finally, press in the new bearing, reassemble the hub, rotor, and caliper, then reinstall the wheel and lower the vehicle.
Remove wheel then remove the big nut that holds the axle to the hub. Remove the brake caliper and rotor, through the hole in the face of the hub(where the wheel studs are) remove bolts that hold the hub and bearing to the steering knuckle. Tap hub and bearing assy from knuckle. The hub and bearing is one part.
35 mm
Most front wheel drive wheel bearing/hub assemblies are not serviceable.
To replace the front wheel bearing on a 1991 Mercury Capri, first, safely lift the car and remove the front wheel. Then, detach the brake caliper and rotor, followed by the hub assembly. Use a suitable bearing puller to remove the old bearing from the hub, and press in the new bearing, ensuring it's properly seated. Finally, reassemble the hub, rotor, and caliper, and reinstall the wheel before lowering the car.
To replace the front wheel bearing on a Skoda Felicia, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor, then use a hub puller to remove the wheel hub and access the bearing. Replace the old bearing with a new one, ensuring it is properly seated, then reassemble the hub, rotor, and caliper before reinstalling the wheel. Finally, lower the vehicle and test for smooth operation.