0
What else can I help you with?
How are solids and liquids determine?
solids are hard the molecules are squished together and if you pour it in a glass it wont take shape. liquids will take any shape
How do you add antifreeze to a 95 grand am?
you open the plastic bottle and pour in the antifreeze
How do you make a Tosh tini?
order and expensive bottle of water, pour half of it out and refill it with tap water, shake and pour into a glass adding a lime/lemon
How many glasses of champagne in 1.5 bottle?
Depending on how much you pour per glass, there are 10 to 12 glasses in a 1.5 liter bottle.
Why would a milk bottle probably crack if boiling water were poured into it?
The sudden change in temperature can cause the milk bottle to expand rapidly and crack due to thermal stress. The glass or plastic material may not be able to withstand the heat, especially if it was not designed for hot liquids.
Who made green glass soda bottle with the words we squeeze your pour?
"Realemon" lemon juice. Still around today.
Why should you never pour hot liquids into a cold drinking glasss?
you can if you put a spoon it the glass first before pouring in the hot liquid, otherwise the glass might crack
If there are two bottles 5 and 7 liters how to make 6 liters?
Fill the 5l bottle Pour the 5l into the 7l bottle Fill the 5l bottle Pour 2l from the 5l bottle to the 7l bottle, leaving 3l in the 5l bottle Empty the 7l bottle Pour the 3l into the 7l bottle Fill the 5l bottle Pour the 5l into the 7l bottle leaving 1l in the 5 ll bottle Empty the 7l bottle Pour the 1l into the 7l bottle Fill the 5l bottle Pour the 5l bottle in the 7l bottle which makes 6l in the 7l bottle! Hard work for just 6l!
Why will a milk bottle crack if you pour hot water into it?
The milk bottle is made of ordinary glass with a relatively high coefficient of thermal expansion. Glass has poor thermal conductivity, so the inside of the bottle will be hot and outside cold. This temperature gradient will cause a stress in the glass and if the glass has small imperfections or flaws in it the glass will break. That is why coffee pots are often made of low expansion glass, like Pyrex, to prevent high stress.
What is the best way to remove old beer sediment from a bottle?
To remove old beer sediment from a bottle, gently pour the beer into a glass, leaving the sediment behind in the bottle. Avoid shaking the bottle to prevent the sediment from mixing back into the beer.
How do i measure a shot from a half gallon bottle of liquor?
Same as any bottle, put a pourer spout in it, do the correct count into the glass. There are special pouring systems that eliminate the need to handle the heavy half gallon bottle. You good also go "old school" and pour into a shot glass..
What is a good attention getter for a speech about the benefits of red wine?
Pull the cork out of a bottle, pour yourself a glass of red wine and drink it.
