0
What else can I help you with?
Do you need a amp for a wireless mic?
Yes
Block diagram of FM transmitter?
very rough: +---+ |##| +---+
How can you make an amplifier for a contact mic using batteries?
I think you are talking about a pre-amp for a mic. Search CB Radios and you will see alot of battery powered mics.
Why does the amp make noise when you get too close?
It's called feedback. The microphone causes a loop, what is coming out if the amp is being asorbed by the mic, sent back to the amp and projected again. The loop causes a squeal.
How do you hook a marshall amp into a pa?
You can either run a patch cord from the "line out" jack on back of your amp to the board (or head of the snake, if your band has a snake for the PA). If your amp doesn't have a line out jack, you can place a mic in front of your amp, and plug it in to your board.
How do I properly plug a microphone into a guitar amp?
To properly plug a microphone into a guitar amp, use an XLR cable to connect the microphone to the amp's input labeled "Mic" or "XLR." Adjust the volume and tone controls on the amp as needed for the best sound quality.
Do you need a special amp to use a microphone?
Most microphones plug into a PA system which typically consists of a preamp, a mixer, a power amp main speakers and monitors although not all components are needed and often other components such as effects processors and noise gates are added. For more information visit this webpage: http://en.wikipedia.org/wiki/PA_system
Can you connect a mic to a bass amp?
I love my SM-57. Its got a huge range and is totally the best universal mic that can get anything from an amp to a snare to vocals. Unless you really need high end gear for really serious recording, I'd go with a versitile mic. I imagine though if you're asking on here, you are not doing something so serious to drop a few grand on a ultra high end (low end :) ) mic.
What is the amp for a microphone?
That is a microphone preamplifier. Scroll down to related links and look at "How to Make Sense out of the Mic Preamp Jungle".
What are the best practices for achieving a high-quality sound when recording amp metal music?
To achieve high-quality sound when recording amp metal music, use a good quality microphone, position it close to the amp speaker, experiment with mic placement for different tones, use a high-quality audio interface, adjust EQ settings to enhance the sound, and consider using amp simulators for additional flexibility.
Why cant your electric guitar not play though the pa but acoustic electric you can?
A PA system is intended for a certain frequency range, same with a guitar amp and bass amp. Bass amps for example are made to handle a lower frequncey range so plugging a bass into a guitar amp can damage the speaker because the guitar amp cannot handle to lows of the bass. The same is for a PA system. To properly play through a PA system it is better to mic a guitar amp and then run the mic through the PA. The mic will limit the frequencies of the guitar allowing the PA to handle it better. Most live venues will do this so bringing a Marshall full stack isn't neccesary. Even a small 50watt amp would work fine in a live setting as long as it is miced.
Is a boss amp a good amp?
Yes
