What is a good use for a floppy drive?

Use a floppy drive, drag and drop the files you want. The space you have though will be extremely limited, as your using a floppy drive

No Macintosh has included a floppy drive since the release of the iMac G3 in 1998. If you need to use a floppy disk, you will have to purchase an external USB drive.

You need a floppy disk drive - either use an old computer or buy a standalone USB floppy drive.

You would have to use a USB Floppy drive. Most of these cannot be easily mounted internally, however.

Using a boot floppy actually has little to do with Windows XP itself, as you are bypassing Windows XP when you use one. To use a boot floppy, place it in your floppy disk drive and reboot. If your computer is configured to boot from the floppy drive, it will boot automatically. If it isn't, you will need to enter your BIOS setup and change the boot order so that the floppy drive is the…

An internal floppy disk drive (rarely used nowadays) uses a Molex connector. I have an external floppy drive (in case I need to search an old floppy) that uses a USB connection.

The Dell Inspiron is not equipped with an internal or external floppy drive. If you want to use floppies with it, you'll have to purchase an external USB floppy drive.

You need to insert the floppy into a floppy drive (A Drive) In the explorer window it will show as 3-1/2" Floppy (A) When you highlight the "A" drive all the data in the floppy will show. From there you can drag or copy & paste to new destination If you don't have an "A" drive; a. You can use another computer that has one and copy the files to a USB drive. or b…

The B: drive was originally used back in the days when having two floppy drives was common. A: and B: are reserved for floppy drive use.

Drive B is reserved for use with a(n additional) floppy drive

a floppy ribbon cable that tricks the computer into using the drive as A:. This is done with the use of a special twist in the cable that electrically changes the DS configuration of the drive after the twist. This twist, then, causes the controller to think the drive configured as B: is really configured as A:. For this reason, during installation of a floppy drive, always make sure your Drive A: is located AFTER…

Before you worry about your ribbon cable, you might want to fix the drive. A drive that is 'floppy' is not a good sign.

Mainly lack of capacity. A floppy disk is usually 1.44 MB. Modern flash drives, hard drives, etc. are in the gigabytes and terabytes ! You can still use a floppy drive (I have a USB external floppy drive), but it will become more difficult to get new floppy disks as manufacturers abandon a rather antiquated media.

Use an external USB floppy drive. If you MUST have internal.... if you're good and creative you -might- be able to disassemble an external USB floppy drive and mount it like an internal drive. Alternatively, you could hunt down an old LS-120 "superdisk" drive. Its an IDE drive (40 pin connector, like your hdd or cdrom) that reads floppies (in addition to high-capacity proprietary disks)

You can use USB floppy disk drive in any machine..

By buying a floppy drive. You can buy an external USB floppy drive for under $50.

This simply isn't possible. Hard drives and floppy drives work in very different ways.

A floppy disk is a magnetic disk used to store computer data. A floppy drive is the drive that the disk is inserted into to read and write data on the floppy disk.

THE FLOPPY DRIVE THE FLOPPY DRIVE

in a floppy drive, a small pin hits the area where that little switch is on the floppy. if it passes through, the floppy drive detects the floppy as write/read. it it doesn't pass through, the floppy drive detects the floppy as read only

To use a floppy disk, you have to have a floppy disk drive. Floppy disks memory devices before Mp3's came out, even before Cd's.

Floppy connectors are used to transfer data between a floppy drive and a computer via motherboard, in order to use a floppy disk. They are very similar to IDE cables, but are a little smaller, and are exclusively for floppy drives.

Typically, the A drive is the floppy drive; the C drive is the hard drive; and the D drive is the CD drive.

The OS is a program. The computer has the floppy drive.

[International Portal Floppy Drive , www.ruanqu.net] is "TEAC low-density jumper floppy drive, SONY low-density jumper floppy drive, YE-DATA low-density jumper floppy drive, EPSON low-density jumper floppy drive, MITSUMI low-density jumper floppy drive, Panasonic low-density jumper floppy drive, Mitsubishi low-density jumper floppy drive, CITIZEN low-density jumper floppy drive, NEC low-density Jumper floppy drive "global distributor. ] Product Name and Description: Additional Explanation: (Except for special instructions) Note: refurbished, tested, and re-certified. Meet or exceed the original…

a customer as an IBM Desktop computer

I believe the A: is for a floppy disk

With the use of flash drives becoming standard the floppy drive is becomming obsolete just like the cassette deck or VCR. Most consumers are looking to get a good computer for a cheap price thus removing unessesary part like a floppy drive that most do no use anymore is a good way to make the computer more affordable. I believe that with Dell you can still have one added but its just not a standard…

A computer floppy drive is the device that reads and writes to a floppy disk. It is located on the front of the Computer.

There are no floppy disks in a hard drive.

If your system has a floppy drive you can use another computer to place the needed driver on a floppy disk an then reinstall them. You could use a USB drive to transfer the drivers to the computer if no floppy drive is present. There are also several ways to connect a second computer to the faulty system so the needed drivers can be transferred and installed.

To read a floppy disk, you insert a floppy disk into a floppy disk drive. Not all computers have floppy disk drives. Typically desktop computers or ones that stand on the floor have floppy disk drives. New machines today allow a USB thumb drive (USB flash memory storage device) to be used in place of a floppy drive. All modern computersy have USB connections. If you need to read a floppy disk and you computer…

CDROM floppy drive

a cable for connecting a floppy drive to the computer motherboard.

There are two heads on a floppy drive actuator.

1. You can use WE to copy files on the floppy disk to a folder on the hard drive, then copy contents of the folder to the 10 disks. 2. Use a command prompt window, use the copy command to copy files on the floppy disk to a folder on the hard drive, then use the copy command to copy the contents of the folder to the 10 disks.

Floppy drive? I have never used a floppy drive to format a HDD. If you're trying to format the internal drive that contains your core system files then you can use a Windows XP installation disk to format it. If not then you can use the Ultimate Boot CD. This CD is burnable using Alchohol 120 and you can boot into it and it contains a HDD wiper. I'm sure it also comes with a…

No. However, there are adapters that would allow you to replace a floppy drive with an SD card reader. There are also special floppies that can hold an SD card, so you can use it in a classic floppy drive. If you need to use USB, you will need to install a USB controller in an available PCI expansion slot.

The four pin Floppy drive power cable...

floppy drive

Hard Disk Drive, Floppy Drive

Correction: the "A" Drive is a floppy disk dirve that holds, reads and writes on the floppy disk.

Assuming your drive <B>A</B> is a floppy drive, you turn off write protection on your floppy disk. If there is a square hole in the corner of your floppy disk, move the square plastic cover to close the hole. If the plastic cover is missing, use folded paper or any other material to plug the hole.

After you make the floppy disc a boot drive (beforehand), you can use it to boot your system when you are unable to boot using your harddrive.

No. Floppy drisks do not need any formatting at all. Just pop it into the floppy drive and that's all you need to do.

Answer A standard floppy drive cable in a computer has 34 pins.

Nowadays, not at all. I have a USB floppy drive I purchased for the business about 11 years ago and the last time I used it for any project was probably six or seven years ago. They are not utilized anymore as the storage capacity of a floppy disk is infinitesimally small by today's standard (a high-density floppy could store up to 1,457,664 bytes, about 1.4 megabytes) and the file access speed was atrociously slow…

The A: and B: drives on a desktop computer are reserved in the BIOS for floppy disk drives. As most computers only come with one floppy disk drive only the A: drive will be visible in file explorer. If a second floppy disk drive is fitted then both A: and B: drives will be visible. Computers used to have a B: drive. It was the second floppy drive. Since people no longer copy from one…

Creating a windows password reset disk. Even then, this is only because they only take about a megabyte and you can only have one on an otherwise blank memory medium. If you use a USB drive, you can't have anything else on it. In general, ALWAYS use a USB drive because you have much more storage room. The only difference between a floppy disk and a USB drive is in terms of capacity: 1.44 MB…

for putting floppy disks in it