A jam nut locks another nut from backing off.
A nut that is used to secure another nut is called a jam nut.
any nut that fits will do, but one the same is better
· jack . jam nut (used to lock another nut)
In the context of a jammed nut or a jammed screw, the opposite of jam would be loosen or release. In the context of a traffic jam, the opposite would be flowing or freely flowing traffic. :)
south pole south pole south pole
Jam can be used for toast, and my favorite, PB&J.
in donut king donuts Adidas jam is used with nike icing in donut king donuts Adidas jam is used with nike icing
Same as any other car on the road. Break the jam nut loose, take off the nut and separate the tie rod from the hub.
hazel nut
It could be a worn stud or worn nut. If it's really bad, you may need to install a new stud. If a new nut doesn't fit tight, you could try putting a jam nut on top of the rocker nut.
Assuming yours has a double jam nut, inner nut gets torqued to 350 ft/lbs, backed off, and torqued to 50 ft/lbs. The outer nut is torqued to 250 ft./lbs.
on the throttle body, side closest to fire wall, below where the throttle cable connects to the body, is a screw it has a 8mm jam nut on it loosen the nut, run the screw in to your preferred idle, tighten nut and done