it is a plate that you kick
Behind the driver's kickplate. That's inside the car, right hand side (RHD car)
6"
It's in the cab under the passenger side kickplate. Remove the two screws that hold the kickplate and remove the kickplate. With all the wires connected to it the emissions computer is unmistakeable. John
under passenger side kickplate
front passenger kickplate (under the glovebox on the right side)
Driver's side floorboard. Kickplate has 1 screw in it. Remove kickplate and remove the 4 screws attached to the molding that runs down the side of the seat. Pull molding towards backseat and the whole panel will come right off. The relay is under the kickplate attached to a wire harness. Push in small lever on relay and remove. Then plug new one in. Simple. I did one today. First time to do that but I learned where it is and how to change it.
There are three locations under the hood driver side, kickplate on driver and passenger side.
Take off the door panel and the lower kickplate on the side of the truck by the e brake.
Read the small aluminum ID plate riveted to the frame inside the door or behind the kickplate/grill.
Amanas have coils underneath (near the compressor) and should be cleaned at least once a year (more often if you have pets that shed). Older Amana refrigerators are especially sensitive to air flow blockage. First, remove the kickplate/grill at the bottom front covering the opening under the lower door. Clean the kickplate outside with a garden hose to remove any dust and hair. Next, using either a condenser coil brush (looks like a bottle brush) or a vacuum cleaner with a crevice tool (which doesn't do as good a job), clean over, under and through the coils found behind the kickplate.
the bcm and interior fuse panel are together under the dash above kickplate by drivers left foot held in with 3 (1/4") screws
The indicator fuse on a Ford Falcon EB is located under the driver's side kickplate. To reach the fuse, the driver's side door needs to be opened.