It is the machine's foot-pedal. Basically, it enables an operator to use both hands while controlling the speed or the operation of a machine with the foot. A simple example is a sewing machine.
The word rotor is used to refer to a rotating part of a machine. It is also a palindrome.
a ROTOR is basically any part of a machine that rotates. eg the armature in a motor a STATOR is the part of a machine that is stationary. ie the ROTOR revolves within the STATOR
Hydraulic machinery uses a liquid usually oil under pressure to transmit energy, hydraulic machine use the power of fluid to work, hydraulic machine are part of our everyday life.
A torsion testing machine is used for determining the shear stress, modulus of rigidity, strain energy, ultimate torsional stress, etc of a material. It is mainly used in the field of Mechanical Engineering. The machine consists of two jaws. One jaw is capable of rotating whereas the other jaw remains stationary. The movable jaw is driven by an electric motor which can be operated in both forward and reverse directions.
operated by air (from a compressor) rather than operated by battery or electricity
-> To work a Treadle. or-> a pedal or lever operated by the foot for circular drive,as in a potter's wheelor sewing machine.
A foot lever is a lever that is operated with the foot.
A foot pedal is the same thing as one of the brake, accelerator or clutch pedals in a car, it is could also refer to one of the pedals on a bicycle or the pedal on a sewing machine. In other words it is a leaver operated by a person's foot.
The difference between an electric sewing machine and a manual sewing machine is only the method of propulsion. The electric machine uses an electric motor, while the manual machine uses a hand crank or foot pump to power it. The actual sewing machine is the same.
They are called "Kick Down Stops"
Presser foot is a part of the sewing machine, precicely the part that holds the canvas down when you sew. A quarter-inch foot is a presser foot designed to allow the user to sew seams 1/4" wide
A lever operated by the foot Thank You
where can I find a coin operated dry cleaning machine in orange county, ca
A foot operated hydraulic pump is used for lifting and a heavy duty gearbox for 320° of controlled tipping of the drum. The standard machine is designed to handle 205 Litre Steel drums that have two equi-spaced chimes over its length.
I believe its called the foot.
Classic metal cutting machine tools are characterized by manually operated, power driven (usually electric) stationary machines.
a vending machine