0
A mini-SATA or mSATA connector is used by smaller devices such as 1.8" SATA drives, some DVD and Blu-ray drives, netbooks, laptops. (devices which require a solid-state drive in small footprint (size).
Applications include netbooks, laptops and other devices that require a solid-state drive in a small footprint.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How to connect hard disk with sata 3 to sata 1 port?
SATA 3 is backwards compatible, it means you connect it the same way as SATA 1.
Sata is a male or a female port?
male
Does an iMac G3 have a SATA port?
No, iMac G3's were discontinued before SATA was introduced
What type of sata port is on a Foxconn C51GU01 Motherboard?
Most likely it's 2 SATA 2 ports.
Does an hp pavilion xt926 have an SATA port?
No, it does not. It only has 2 IDE Ports. But you could buy a PCI Card with SATA ports.
What type of port is a PS2 Port?
A PS/2 port is a mini-DIN connector. For more on mini-DIN ports, see this Wikipedia page: http://en.wikipedia.org/wiki/Mini-DIN_connector
How many devices can be connected to one SATA interface?
One. SATA interfaces are USUALLY only one device at a time. It is possible, if the controller supports it, to use a port multiplier which allows you to use four devices off one port .
How do you install two hard drives with only one SATA port?
use a different harddrive not using SATA such as an external USB or IEE1394 or SCSI or replace your motherboard with one with more SATA ports (4 ports is standard minimum)
Is sata 3.0 backward compatible with sata 1.5?
If you plug a SATA 3.0 drive into a SATA 1.5 port on your motherboard, the drive should be able to function at a 1.5Gb/s transfer rate. Some drives require a jumper setting, while others natively recognize their allocated bandwidth and adjust accordingly.
What are examples of serial storage devices?
Serial port generally refers to Serial ATA port. These Serial ATA ports are better known as "SATA" ports. You will find them on Hard Drives and Solid State Drives specifically. But you may also find them on peripherals such as card readers for Flash media and Optical Drives. SATA is categorized into 3 categories SATA, SATA II and SATA III. The Function of SATA is to transfer data. Previous to SATA, Computers used "IDE" service which was far slower and more expensive to manufacture than SATA.
Two western digital hard drives one IDE and other is on Sata cable The Sate is Master but can not get the IDE WD to work or reconize?
Western digital needs to have no jumper to be by itself on a cable, or bios sometimes shares the sata as ide0 and so change your sata port and enable one as ide and the other channel as sata.
What does marvel mini port driver do?
nothing.
