something that is non flammable and resists high temperatures, such as fine powdered rocks or some types of clay, just anything that's not flammable and heat resistant
Injection molding is a commonly used manufacturing process for the fabrication of plastic parts. the injection molding process need injection mold and injection machine.--------------------------------------------------------Injection molding is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. Material is fed into a heated barrel, mixed, and forced into a mold cavity where it cools and hardens to the configuration of the mold cavity.After a product is designed, usually by an industrial designer or an engineer, molds are made by a moldmaker (or toolmaker) from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection molding is widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars.the following is a photo of the injection molding process:http://www.vulcanmold.com/article/Plastic-Injection-molding-process.htmlA Hollow mould is made from steel in several parts. when the mould is all together the hollow within it is the same shape as the object you wish to produce. The mould is water cooled to keep its temperature under control. molten plastic is forced into the mold at high pressure. it is left to cool for a specified period of time, then the mold is pulled apart in such a way that the object falls out of the mould and the whole thing starts all over.
Shot Capacity : The maximum weight of molten resin that the injection molding machine can push out with one forward stroke of the screw during injection molding operation. Shot weight : The weight of the material injected into the mold in a single shot by an injection molding machine. (Weight of the molded part(s) + Weight of the runner + gate and the sprue)
The difference is within the machine and processThe presses used for injection molding are horizontally operated with a unique material delivery system. The thermoset compound is fed and injected with a high speed reciprocating screw, or a plunger system that reduces glass degradation for better part strength. The major advantages of injection molding:Better for small to medium part sizes (0.1 lbs to 6 lbs) in high volume.Tight tolerances can be achieved with these low-shrink materials. Post curing is not needed.Consistent material delivery into the mold cavities.Good strength for small parts, especially when molded with Thick Molding Compound (TMC).The presses used for transfer molding are vertically operated and equipped with a hydraulic transfer system and controls. The thermoset compound is loaded into a chamber known as the transfer pot. The mold is then closed and a transfer plunger forces the compound from the pot through the runner system and gates into the mold cavities. The major advantages of transfer molding:Better for small to medium part sizes in medium to high volume.Good for molding in complex metallic inserts into the part (encapsulation).Tight tolerances can be achieved with these low-shrink materials. Post curing is not needed.Consistent material delivery into the mold cavities.
They're many vedio on youtube.You will be clear after seeing. If you're interested on molds, you can follow my google page "Sino-Mold Industrial Co.,Ltd" I always upload useful articles
Tie bar clearance
is a manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold.
Resin transfer molding is a smaller mold that will look great for smaller homes. Compression molding has a satied look which is great for stucco.
Moisture makes it mold.
In the plastic injection molding design, in addition to the general mold design matters, the following matters should also be considered: To obtain the product with the required dimensional tolerance, the appropriate mold dimensional tolerance should be considered Consider preventing fluctuations in injection molding shrinkage Consider preventing molding deformation Consider preventing mold release deformation To minimize the mold-making error It is necessary to consider preventing the fluctuation of mold accuracy
Injection molding is a process in whih the material normally plastic,is injected into a mold to produce a componenet.
No, honey doesn't prevent mold on bread. Honey slows down the molding.
A mold (also spelled 'mould') is a hollowed-out or shaped container. When a heated material like plastic is poured in and allowed to cool, the result is a solid object shaped like the mold interior. Although the words 'casting' and 'molding' are sometimes used to refer to the same process, in general terms casting is applied to forming metal objects and molding is applied to forming plastics and other non-metallic materials. There are many different types of molds and molding processes, which are documented in more detail in the related links.
NO ! It is not advisable to eat anything that is molding !
cold old mold
As food ages and decomposes, mold may form on the food.
Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The ...en.wikipedia.org/wiki/Compression_moldingA variety, from light sockets to skids.
Compression molding starts by inserting plastic or gelatin into a heated mold. Once the material is heated to a pliable state, a hydraulic press compresses the pliable plastic against the mold, which creates a perfectly molded piece. This process is used mostly for manufacturing gears, dinnerwear and electrical parts.