An open circuit is a situation when there is no electrical path from the positive terminal to the negative terminal (in case of DC) or from the live terminal to ground (in case of AC)
its is an oject that can be used in a cicuit board, this object should allow an electric current to flow through it
a house is a big paralel circuit but it is possable to wire somthing in series in a house like if your refrigerator is on its own circuit it would be a series circuit but its full of more wiring itself. I guess the best answer would be a complex cicuit,
0.5 lead PF or Power Factor means that the signal is ahead of the input voltage by a factor of 90 degrees. The lagging PF means it falls behind the input signal. In sinusoidal signals 0.5 lead or lag will be the same.
normally close relay is closed initially and when a signal arrive to it it will open and dont let the current pass i9n opposit to normally open
The general answer is that a continuity tester is used to check for an open circuit.
it is ugly
the type of cicuit are the animal circuit himala circuit ewan circuit and san napuntang cicuit
Yes. It is designed to "trip" (Open the circuit) when an over-current situation is detected.
watts
A cicuit. -Hong Nguyen
when 2phases bridge together,that is short circuit
mineature cicuit breaker
The pulmonary cicuit carries blood to the lungs.
is it g style
a power source, a resistor and wiring to connect them.
The control switch is probably faulty (or faulty wiring to the switch and/or motor). the resistor unit must be open cicuit that is mounted in the air duct near the blower usually
Zener is connected in parallel to the circuit