answersLogoWhite

0

Plate heat exchangers are used in combination boilers, also sometimes referred to a 'combi-boilers'. The plate heat exchanger is found inside the hot water section and uses metal plates to move heat between two fluids.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where is the dollar plate on a heat exchanger?

It's the flat, flanged cover on the front (and sometimes the rear) of a shell & tube heat exchanger.


What is plate heat exchangers?

a plate heat exchanger is a metal plate which is will be in contact with another item eg air or another metal object to move heat from one to another


How to solve the failure of plate heat exchanger?

The plate heat exchanger has the characteristics of high heat transfer coefficient, small pressure drop, compact structure, light weight, small footprint, convenient area and process combination, strong versatility of parts, wide selection of materials, and simple completion of large-scale production. Widely used in the fields of food, machinery, metallurgy, petrochemicals and ships.In order to ensure the normal operation of the plate heat exchanger, it is particularly important to extend the service life of the plate heat exchanger components (such as plates and rubber pads), and to understand the problems and the causes of the plate heat exchanger and the treatment methods.Brazed Plate Heat ExchangerBrazed Plate Heat Exchanger Model ZL20BProblem:The plate heat exchanger has leakage (small amount, water droplets are not continuous) and leakage (large amount, water droplets are continuous). The primary parts of external leakage are the seal between the plate and the plate, the position where the plate seals the leakage groove, and the inner side of the end plate and the compression plate.The reason:The clamping scale is not in place, the scale across the ground is not uniform (the ground scale error should not be greater than 3 mm), or the clamping bolt is loose. Part of the gasket is separated from the sealing groove, the main sealing surface of the gasket is dirty, the gasket is damaged or the gasket is aging. The plate is deformed, and the misalignment causes the running mat.Solution:In the state of no pressure, clamp the equipment from the beginning according to the clamping scale supplied by the manufacturer. The scale should be uniform and common. The error of the compression scale should not exceed ± 0.2N (mm) (N. is the total number of plates) The parallelism should be kept within 2 mm. Make a symbol on the leakage part, and then check the heat exchangers one by one, and install or replace the gaskets and plates from scratch.YOJO can provide a variety of heat exchange equipment solutions for the failure of the plate heat exchanger. For leakage problems of the plate heat exchanger, if there are other questions, please contact YOJO.Tag: Heat exchange equipment solution, Heat exchange equipment, plate heat exchanger leakage


What is a dollar plate on a heat exchanger?

A dollar plate on a heat exchanger is a type of heat transfer surface that consists of a thin metal plate with a corrugated pattern on both sides. These plates are typically made of materials such as stainless steel or titanium and are used to increase the efficiency of heat transfer between two fluids. The corrugated pattern helps to enhance turbulence and promote heat exchange, making the overall process more effective and efficient.


Why Expansion bellows are required in heat exchanger?

expension belows are used for heat exchanger to avoid thermal stress


Difference between heat exchanger and condenser?

A heat exchanger is a device used to transfer heat between two fluids at different temperatures. It can be used for both heating and cooling applications. A condenser is a specific type of heat exchanger that is designed to transfer heat from a vapor to a liquid state, typically used in refrigeration and air conditioning systems.


What is difference between condenser and heat exchanger?

A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.


How do you clean welded plate heat exchanger?

Refluxing solvent is one way but an ultrasonic batch is better.


Name the types of heat exchangers used as super-heaters?

The types of heat exchangers commonly used as super-heaters are shell-and-tube heat exchangers and plate heat exchangers. These heat exchangers are designed to efficiently transfer heat from the combustion gases to the steam in power plants, increasing the temperature and improving the efficiency of the system.


Is it correct that Plate Type Heat Exchangers can only handle very clean liquids practically free from any suspended particles as compared to Shell and Tube type Heat Exchanger?

It really depends on the fluid. If the fuild is taken into consideration when sizing the heat exchanger then there are times when a plate and frame can work. It really comes down to proper sizing.


What transfers heat from the hot gas to the airstream to heat the structure?

A heat exchanger transfers heat from the hot gas to the airstream by allowing the two to come into close contact without mixing. The heat exchanger helps to efficiently transfer heat energy from one medium to another, heating up the airstream that is used to heat the structure.


Function of heat exchanger?

There are actually many types of plate heat exchangers, and the YOJO brand has introduced brazed plate heat exchangers and gasket plate heat exchangers. Today is the home of brazed heat exchangers.Brazed plate heat exchangers have no headers, tie rods or sealing gaskets, and the plates are brazed at a temperature of 1100 ° C. During the assembly stage, a piece of brazing material (usually copper, and nickel) is placed between the two plates, the package is compressed, and then baked for several hour.BPHE is more compact and lighter, and the brazing material has the functions of both washer and frame. The intersection between the corrugations of the two coupling plates forms a dense network of contact points, which impart pressure tightness and generate vortex flow, thereby improving heat exchange. In this way, even at low nominal input speeds, the turbulence of the fluid is high, and for low flow rates, the fluid flows from laminar to turbulent.