0
What else can I help you with?
What is the purpose of floating head in heat exchanger?
allow for tube expansion
What is a gas furnace heat exchanger?
The heat exchanger is the metal wall or tubing that is heated up when the burners are ignited. The inside of the heat exchanger allows the toxic flue gases produced from the burners to exhaust out through the furnace flue. The outside of the heat exchanger is where the cold air passes over, becomes warmed, and is blown throughout the ductwork of the home. The heat exchanger is the only wall separating the toxic flue gases from the supply air. If a crack develops in the heat exchanger, there is a potential for carbon monoxide gas to leak over to the supply side and be blown throughout your rooms. Carbon monoxide gas is odorless. The human senses will not detect its presence. Ron Ferrara- DHR Mechanical Services, Inc.
Application of plate heat exchanger?
The plate heat exchanger is used in multiple systems in the field of HVAC, including geothermal water heating systems, instantaneous domestic hot water systems, semi-instantaneous domestic hot water systems, swimming pool constant temperature maintenance systems, solar hot water systems, etc.Plate heat exchanger systems provide plate heat exchanger designs for each application:1. Geothermal water heating system: The heat exchanger acts as a separate device for the host of the heat pump and the open cold and heat source, which overcomes the corrosion of sensitive equipment such as the host by water quality.2. Domestic hot water system: The good heat transfer performance makes the plate heat exchanger gradually replace the traditional container heating system, with a smaller area and more economical investment.Instantaneous domestic hot water system-to ensure that users have hot water supply anytime, anywhere, compact system, no storage tank required, large boiler capacity required, large heat exchanger Semi-instantaneous domestic hot water system—requires smaller boiler capacity, smaller heat exchanger, easy to grow bacteria in the storage tank, and requires additional places for the storage tank.3. Swimming pool constant temperature maintenance system: Install a heat exchanger to make the pool water circulate independently. In order to avoid the corrosion of the plate by the chloride ion in the pool water, please choose the plate material carefully.4. Solar hot water system: As one of the clean energy sources, solar energy has attracted more and more attention. By using a heat exchanger, the loop for collecting solar energy and the loop for domestic hot water can be separated, thereby effectively protecting it. Cleanliness of the domestic hot water loop.If you want to know more, you can search：YOJO
Heat Exchanger Types and Uses?
heat sink classified according to the shape, the shape is how to dissipate within the selected heat sink that is the main intension here,, k type l type rectangular triangular chassis i know this much u can down load the pdfs for the types how to select the required heat sink 9844354439
How hot does a gas fired heat exchanger get?
There are specific values for heat rise across a furnace heat exchanger given in all installation/operation manuals for all furnaces. As long as these limits are adhered to by the installer the heat exchanger will not overheat. I know this does not answer the question but there is no one blanket answer for all furnaces. Basically the more airflow through the furnace, the lower the HX temp and to determine when the airflow is correct a heat rise test is done and the airflow is set to the mid point of that specification.
When expansion bellows are required in heat exchangers?
Expansion bellows are required in heat exchangers to compensate for thermal expansion and contraction that occur due to temperature variations during operation. They help prevent mechanical stress on the heat exchanger components, such as tubes and headers, that could lead to leaks or equipment failure. Expansion bellows also help maintain the structural integrity of the heat exchanger system over time.
Why is there floating head in heat exchanger?
allow for tube expansion
What is the purpose of floating head in heat exchanger?
allow for tube expansion
What is difference between condenser and heat exchanger?
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
Heat exchanger for ammonia absorption refrigeration system?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
What is split flow heat exchanger?
A split flow heat exchanger is a type of heat exchanger where the hot and cold fluids are split into multiple streams before being recombined. This design allows for more efficient heat transfer as it increases the surface area of contact between the two fluids. Split flow heat exchangers are commonly used in industrial processes where precise temperature control is required.
What is mean by agitated vessel heat exchanger?
Agitated vessel heat exchange refers to the heat exchange that is carried by the internal coils or through the external jacket on the vessel. A recirculation loop with an external heat exchanger may be used when the coils or jacket cannot provide the surface area required.
Exchanger is not transfer heat why?
Heat exchanger manufacturers is an ISO 9001 certified company located in Coimbatore, Tamilnadu. The company started its functioning 2011 in, with a strong background in heat exchanger manufacturing. Our well-experienced and dedicated employees consistently thrive to serve our customers with the best heat exchanger solution. visit :: heatexchangersmanufacturers.in
What is heat exchanger duty?
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
When is it necessary to schedule a heat exchanger replacement?
It is necessary to schedule a heat exchanger replacement when the current heat exchanger is damaged, malfunctioning, or no longer efficient in transferring heat effectively. Regular maintenance and inspections can help determine when a replacement is needed.
What is the relationship between the efficiency of a heat exchanger and its surface area?
The efficiency of a heat exchanger is directly proportional to its surface area. This means that a larger surface area allows for more heat transfer, resulting in a more efficient heat exchanger.
What is the abbreviation for heat exchanger?
hx
