Here are [the only] two: too much Voltage is applied, or there is some short [a reduction in the normal Resistance of the armature] that increases Current and lets the Smoke leak out.
Excessive current can be in the connection of many devices into a single socket.this may cause overload in the circuit
No. There is an excessive current draw, possibly in the form of a short circuit. Get an electrician to check it and fix it before you set fire to house.
The fusing current is a value of current that causes the fuse to melt and interrupt the flow of current. Usually, reference is made to the minimum fusing current which is the smallest value of current that will cause the fuse to melt.
10 volts applied to 5 ohms would cause a current flow of 2 amperes. Current = voltage divided by resistance.
A decrease in current.
Taking of some drugs to an excessive amount can cause damage to the brain and result in Epilepsy. Such cases have been known.
cause of excessive blow- by
Too much current cause excessive heat and cuases melting of the relay contacts.
Yes. It is occasional, but it is possible.
A bad heart disease can cause excessive sweating since the Thyroid hormone can cause excessive sweating.
Excessive amounts of magnesium can cause loosened stools and diarrhea. How much is excessive varies from person to person and can depend on their diet as well.
Excessive current can be in the connection of many devices into a single socket.this may cause overload in the circuit
It is possible to puncture your large intestine and cause excessive bleeding leading to death.
Birth defects are possible in pregnant patients taking Cipro. It has not been proven that Cipro is the cause of the defects, however.
Excessive resistance (drag), will cause motor to draw more amps (current flow) to operate.
Yes, taking Klonopin has been linked to having excess mucous in your mouth. There are also other medications that can cause increased saliva including Clozaril.
Motors overheat due to excessive current, not necessarily voltage. Normal voltage can cause a motor to overheat if it is stuck (not spinning). The problem is not usually the voltage, but whatever is causing excessive current flow (usually because the motor is not spinning like it is supposed to).