A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a switch, but other operating principles are also used, such as solid-state relays. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits as amplifiers: they repeated the signal coming in from one circuit and re-transmitted it on another circuit. Relays were used extensively in telephone exchanges and early computers to perform logical operations.
An auxiliary relay is a back-up relay in case the primary relay fails.
The "pick up" of a relay is a setting at which the relay will begin to operate. Such as an overcurrent relay - if the pickup is set to 5A, when 5A is flowing through the relay, the relay will operate.
It depends what relay you mean - a normal relay has four swimmers (e.g. an IM relay or a freestyle relay) bu relays such as a cannon relay can have more
Which relay is the starter relay on a 1994 buick lesabre
Swap relay with another like relay.
I think aux relay is part of relay
the inhibitor relay is between the a/c relay and the cornering relay
Earth fault relay and an over current relay Methods to energies an earth fault relay with simulation diagram?
one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay one is the circuit opening relay
That other relay should be the AC compressor relay.
cdg is circular disk gear relay which is electromagnetic relay
air charge resistor relay