Tenths of a milliliter.
Tenths of a milliliter.
Of course not! A 0.5 ml syringe contains 40% more volume (0.5 - 0.3 = 0.2 ml) than a 0.3 ml syringe.
Pull the plunger of the syringe down to the 0.7 ml mark on the scale. Insert the needle into the liquid and slowly draw up the desired amount of 0.7 ml by gently pulling back on the plunger. Ensure no air bubbles are trapped in the syringe before administering the medication.
1 ml (millileter) is defined as one cubic centimeter (1 cc) so a 3 ml mark is also a 3 cc mark and hence 1cc is equal to 1/3 of the 3 ml syringe or the 1 ml mark.
A 3 ml syringe is commonly used for administering small volumes of medication accurately, such as insulin injections or vaccinations. It is also used in laboratory settings for measuring and transferring small amounts of liquids with precision.
On a 1 ml syringe, 2.5 mg would depend on the concentration of the solution being measured. If you know the concentration (for example, if it’s 1 mg/ml), 2.5 mg would be indicated at the 2.5 mark on the syringe, which is halfway between the 2 ml and 3 ml marks. Always ensure you confirm the concentration of the medication to ensure accurate dosing.
Patiently. You will need to draw the full 3 ml 125 times!
It would be almost 80 times the capacity, so of course, it working wouldn't fit in the syringe.
You should use a 3 ml graduated pipette or a 3 ml syringe to accurately measure 2.75 ml of liquid. These tools provide precise measurements in smaller increments.
This is a badly phrased question. 3 cc = 3ml. a millilitre is a centimetre cubed and that is exactly what cc means. if the syringe takes a max of 3ml, then 3.125 is a full syringe and a 1/24th of a syringe
To administer 1000 mcg in a 3 mL syringe, first ensure you have the correct concentration of the medication. If the medication is in a vial, draw up the appropriate volume based on its concentration to achieve the desired dose. For example, if the concentration is 250 mcg/mL, you would draw 4 mL, but since the syringe only holds 3 mL, you would need to adjust the dose or choose a different concentration. Always double-check your calculations and follow proper protocols for medication administration.
my guess is that a 3/10 cc syringe means .3 of a cc. So you have to fill up the syringe three times plus one more time up to the 10 line. I would check this with a doctor however since if I am wrong you could be giving the wrong dosage