0
What else can I help you with?
How does a sewing machine that works with fashion disks do a straight stitch?
My Singer 3343c works with disks. The disks need to have the stitch width (zig zag width as it were) changed from zero to some width. When the stitch width is 0 all the disks are a straight stitch.
What is stitch length regulator?
The stitch regulator allows you to control both the length and the width of the stitch. The length of the stitch depends on the fabric you are sewing and how small or large you want the stitches to be (for example, if you're basting something together, you'd change the stitch length regulator to a higher number). The width of the stitch is controlled when sewing with an alternative stitch, such as a zigzag.
What does the stitch width dial do on a sewing machine?
You should have an instruction booklet with your machine. That will show you where everything is. This will vary from machine to machine with some being simple and others you should be a rocket scientist to use. The stitch width selector is pretty self explanatory. You use it to select the width of the stitch you want to use in a zig zag stitch.
What is a stitch regulator on a sewing machine?
A stitch regulator controls the length and width of the stitches.
What is the meaning of stitch width knob?
The stitch width knob is usually located on the front of a sewing machine to determine the side-to-side motion of the needle as it stitches.
What is the stitch width for a straight stitch?
Stitch length is going to depend greatly on the fabric. You are going to use a longer stitch length on denim than you are on chiffon. That is why it is important to test and adjust your stitch length on a scrap of fabric before you begin sewing your project.
How can I adjust my sewing machine to create a perfect zigzag stitch?
To adjust your sewing machine for a perfect zigzag stitch, first select the zigzag stitch setting on your machine. Then adjust the stitch width and length dials to your desired settings. Test the stitch on a scrap piece of fabric and make further adjustments as needed until you achieve the desired result.
What is the zigzag control on a sewing machine?
The zigzag control on the sewing machine allows you to make a zigzag stitch. It allows you to control both the length and width of a zigzag stitch, which looks like a bunch of "Z"'s in a row.
How do you use Elna Super cams?
Adjust Elna SU machine as follows: Set the stitch width knob and the stitch length dial at 0 If there is another Elna-disc in the automatic stitch control (called the elnagraph), remove it by pressing the button Put the Elna-disc you want to use in the Elna graph with the circular mark over the driving pin and press the Elna disc down For single elna discs: Use embroidery and buttonhole foor for filled designs with raised effect and the sewing foot for linear stitches iwthout any raised effect. 1. After inserting the Elna-disc in the Elnagraph, and with the stitch width knob and the stitch length dial on "0", turn: 2. the selector to A (automatic) 3. the needle position to the centered position (red mark) 4. the stitch width knob with the straight mark on top to a position between 1 and 4, as desired 5. the stitch length dial to a position between 1/4 and 4, as desired 6. the stitch is then sewn automatically 7. Position the circle on the Elna-disc opposite the white arrow, by turning the flywheel; this shows the beginning and the end of each automatic stitch or design. For double elna discs: Use embroidery and buttonhole foor for filled designs with raised effect and the sewing foot for linear stitches iwthout any raised effect. 1. After inserting the Elna-disc in the Elnagraph, and with the stitch width knob and the stitch length dial on "0", turn: 2. the selector to A (automatic) 3. the needle position to the centered position (red mark) 4. the stitch width knob with the straight mark on top to a position between 1 and 4, as desired 5. the stitch length dial on A, as desired 6. the stitch is then sewn automatically 7. With the stitch length dial at A, the stitch length should normally be correct. However, for certain very intricate stitches (true hemstitiching with disc 101, 126, 140 or 142) sewn with double Elna-discs, it may be desirable to lengthen or shorten the pattern to adapt it better to the material and thread used. 8. If the stitch is too short ant A, turn the dial to "+". 9. If the stitch is too long a A, turn the dial to "-"
Can applique be made using a sewing machine?
yes but you have to use the zig-zag or applique stitch setting zig-zag=width-4/5 length=2 applique= width-4/5 length=0.5
When was Stitch by Stitch created?
A Stitch for Time was created in 1987.
What is combination stitch?
Is a type of stitch that has a combination of running stitch and back stitch .:)
