It is the flex area between the shoulder of the tread and the bead.
look on the side wall of the tire for max psi that is the tire pressure
Black wall
it should tell you on the tire wall ??psi
When the wall of a tire is compromised, i.e. flaking, cracking, chipping, dry rot, it would not be reliable as to safety. A hole in the tread can be repaired. A breach in the tire wall can not be fixed and if you are unsure, then replace it because a tire blowout while driving is never good.
The psi for tires is located on the side wall of the tire.
You might be thinking of "white wall" tires.
tire sizes are located on the tire wall and varies between cars
Tire pressure is related to what type of tire it is. the recommended pressure for the tire is on the side wall of the tire ========================================================== That is the MAXIMUM cold tire inflation pressure that is shown on the side of the tire
To get the specific tire pressure for your motorcycle you only need to look on the wall of the tire. There you find the size of the tire along with recommended and max tire pressures.
Floyd Linstrom was the first to made a mold to applied white rubber to a side wall and made the first white eall on a tire be for that was made Portawall white wall you would put on the wheel between the tire and the bead , you aired the tire up to hold them om. Mr Linstrom was the first to Gaul anise them to the side of tires.
depending on the tire it is usually around 32 to 34. Check the tire side wall it should say there.
Never seen that. I believe you have to buy tires made with whitewalls.