The turbine converts pressure & heat energy (in steam turbine & gas turbine), velocity energy (in hydro turbine) into mechanical energy which produces rotation of the turbine. This mechanical force is used to rotate the rotor(which is coupled with the same shaft as that of turbine) of the generator which converts this mechanical energy into electrical energy.
(Nuclear reactor) creates heat Water heated to create pressurised steam (Boiler) Pressurised steam released via turbine chamber (Steam Turbine) translating motion to turbine shaft. Turbine shaft windings rotate inside magnets to generate electricity (Generator)
with decrease in fuel consumption the amount of steam produced is also reduced.Hence when lower quantity of steam passes through the turbine the torque generated is less and since generator and turbine are coupled on a single shaft the generator torque also decrease which reduces load.
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
turbine will trip
The shaft is the part that gets turned by the turbine blades. It in turn is connected to the generator within the main housing.
The shaft is the part that gets turned by the turbine blades. It in turn is connected to the generator within the main housing.
The purpose of the Turbine in a power plant is to drive the Generator. The shaft of the Turbine is hard coupled to the drive shaft on the Generator and, turns the Generator to produce the Electricity.In a Hydroelectric station, the Turbine is turned by water rushing past the blades, turning the shaft.In a Stream Powered station, stream from a Boiler enters the Turbine under pressure, expands, rushes past the blades, and turns the shaft.They are turned using steam.
The purpose of the Turbine in a power plant is to drive the Generator. The shaft of the Turbine is hard coupled to the drive shaft on the Generator and, turns the Generator to produce the Electricity.In a Hydroelectric station, the Turbine is turned by water rushing past the blades, turning the shaft.In a Stream Powered station, stream from a Boiler enters the Turbine under pressure, expands, rushes past the blades, and turns the shaft.They are turned using steam.
With a generator mounted on the "turbine". The propeller spins the generator shaft.
-- Hand-crank generator -- Hydroelectric generator -- Windmill generator -- Front-wheel generator on a bicycle -- Car generator, run by a belt from a wheel on the crank-shaft -- Any turbine generator, i.e. turned by a shaft which is forced to turn by anything else
The turbine converts pressure & heat energy (in steam turbine & gas turbine), velocity energy (in hydro turbine) into mechanical energy which produces rotation of the turbine. This mechanical force is used to rotate the rotor(which is coupled with the same shaft as that of turbine) of the generator which converts this mechanical energy into electrical energy.
hydro electric means electricity is produced by the using the Water(hydro). The water is made to fall forcely on the Turbine wheel it makes the turbine to rotate. Turbine is coupled to the Generator shaft. when the turbine rotates the generator rotates and emf is induced in it and the ourput is taken from it
gas turbine generator
(Nuclear reactor) creates heat Water heated to create pressurised steam (Boiler) Pressurised steam released via turbine chamber (Steam Turbine) translating motion to turbine shaft. Turbine shaft windings rotate inside magnets to generate electricity (Generator)
firstly let me tell you that a wind turbine contains a generator, a shaft attached to it, some blades, etc. the moving air moves the blades giving it its kinetic energy and rotational energy is given by it to the the shaft. this shaft rotates the generator and this energy is converted into electricity. hope you have got the correct and desired answer. keep questioning........!!!
firstly let me tell you that a wind turbine contains a generator, a shaft attached to it, some blades, etc. the moving air moves the blades giving it its kinetic energy and rotational energy is given by it to the the shaft. this shaft rotates the generator and this energy is converted into electricity. hope you have got the correct and desired answer. keep questioning........!!!