Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
twist your dick all the way around
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
turbine is working on priciple of change of momentum. change of moentum result in to work.
The turbine converts pressure & heat energy (in steam turbine & gas turbine), velocity energy (in hydro turbine) into mechanical energy which produces rotation of the turbine. This mechanical force is used to rotate the rotor(which is coupled with the same shaft as that of turbine) of the generator which converts this mechanical energy into electrical energy.
turbo blower is an equipment where a turbine is attached with the blower part. steam enters through the turbine inlet and expands through the blades and goes to the outlet which helps the turbine shafts to rotate. this turbine shaft is attached with the shaft of blower that makes the blower rotating.
1.Turbine output is increased for same compressor work. 2.As more heat is supplied,thermal efficiency decreases.
the machine is the one that operates or makes the turbine work. the machine is the one that operates or makes the turbine work.
Inefficiencies in the compressor of a gas turbine cycle increase the back-work ratio and decrease the thermal efficiency of the gas turbine cycle, since they increase the compressor work.
Basically, the wind moves the fins that move the turbine. The turbine then creates electrical energy. (See how does a turbine work)
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
turbine is working on priciple of change of momentum. change of moentum result in to work.
Jet turbine technology
A turbine rotates as a fluid flows through it, and depending on the type of turbine, converts its rotational energy into certain types of useful work. Learn more by following the link I provided.
As the surrounding/ambient temperature increases, the temp of air entering the air compressor increases which means that the it's specific volume of air increases. Since the work of compressor = delta pressure x specific volume of air, then as the specific volume of air increases the work input of compressor increases and this is a problem because the total out put power of the turbine = work of the turbine - work of the compressor, so as the work of compressor increases, the total out put work of the gas turbine decreases. And that's why the efficiency of gas turbine is better in winter than in summer.
in practice;the steam MUST be in the superheated region before entering the turbine.superheated steam means there is not moister in the steam (dry steam)the reason is moister will damage the turbine blades.in theory;the hotter the temperature the better the efficiency (look up vapor power cycles)work done by the turbine = the enthalpy (at temp. of steam entering the turbine)- the enthalpy at the turbine exist.the efficiency = work done by the turbine / the heat input.
lolol
Steam turbine is when a device that has the extract thermal energy from pressurized steam. It is used to do mechanical work on a rotating output shaft. The steam turbine was invented by Sir Charles Parsons in 1884.
The turbine converts pressure & heat energy (in steam turbine & gas turbine), velocity energy (in hydro turbine) into mechanical energy which produces rotation of the turbine. This mechanical force is used to rotate the rotor(which is coupled with the same shaft as that of turbine) of the generator which converts this mechanical energy into electrical energy.