A vertical row of bricks is called a channel.
Also called capstone, it is the top row of stones in a masonry wall.
Stone masonry may be broadly classified into the following two types:Rubble MasonryAshlar Masonry Rubble Masonry:The stone masonry in which either undressed or roughly dressed stone are laid in a suitable mortar is called rubble masonry. In this masonry the joints are not of uniform thickness.Rubble masonry is further sub-divided into the following three types:Random rubble masonrySquared rubble masonryDry rubble masonryRandom rubble masonry: The rubble masonry in which either undressed or hammer dressed stones are used is called random rubble masonry. Further random rubble masonry is also divided into the following three types:Un coursed random rubble masonry: The random rubble masonry in which stones are laid without forming courses is known as un coursed random rubble masonry. This is the roughest and cheapest type of masonry and is of varying appearance. The stones used in this masonry are of different sizes and shapes. before lying, all projecting corners of stones are slightly knocked off. Vertical joints are not plumbed, joints are filled and flushed. Large stones are used at corners and at jambs to increase their strength. Once "through stone" is used for every square meter of the face area for joining faces and backing.Suitability: Used for construction of walls of low height in case of ordinary buildings.Coursed random rubble masonry: The random rubble masonry in which stones are laid in layers of equal height is called random rubble masonry. In this masonry, the stones are laid in somewhat level courses. Headers of one coursed height are placed at certain intervals. The stones are hammer dressed. Suitability: Used for construction of residential buildings, go downs, boundary walls etc.Squared rubble masonry: The rubble masonry in which the face stones are squared on all joints and beds by hammer dressing or chisel dressing before their actual laying, is called squared rubble masonry. There are two types of squared rubble masonry.Coursed Square rubble masonry: The square rubble masonry in which chisel dressed stones laid in courses is called coarse square rubble masonry. This is a superior variety of rubble masonry. It consists of stones, which are squared on all joints and laid in courses. The stones are to be laid in courses of equal layers. and the joints should also be uniform. Suitability: Used for construction of public buildings, hospitals, schools, markets, modern residential buildings etc and in hilly areas where good quality of stone is easily available.Un coursed square rubble masonry: The squared rubble in masonry which hammer dressed stones are laid without making courses is called un coursed square rubble masonry. It consists of stones which are squared on all joints and beds by hammer dressing. All the stones to be laid are of different sizes. Suitability: Used for construction of ordinary buildings in hilly areas where a good variety of stones are cheaply available.Dry rubble masonry: The rubble masonry in which stones are laid without using any mortar is called dry rubble masonry or sometimes shortly as "dry stones". It is an ordinary masonry and is recommended for constructing walls of height not more than 6m. In case the height is more, three adjacent courses are laid in squared rubble masonry mortar at 3m intervals.
A masonry beam is more often called a "bond beam." This is where a block is cut or manufactured with a slot to lay down one or two pieces of rebar down inside the block horizontally. The blocks are filled with grout and this adds horizontal strength to the wall by tying the vertical cells that are filled with grout to the horizontal cells that are filled with grout, creating a grid making the wall much stronger. www.masonryworktools.com
There are a few different types of masonry work. The types of masonry work are veneer, dry set masonry, solid masonry, brick masonry, concrete block, a-jacks, stonework, gabions, and bagged concrete.
I would use type S mortar for vertical applications and portland cement for horizontal work. Portland will work for either but it is rough on your skin and hands.
a horizontal row is called a period.a vertical row is called a group
Also called capstone, it is the top row of stones in a masonry wall.
Group.
A vertical stack of cells is called a column. A horizontal line of cells is called a row.
a horizontal row is called a period.a vertical row is called a group
The horizontal row on the periodic table is called the "period". The vertical column is called the "group".
The vertical "rows" are called Columns, and the horizontal "rows" are called Periods
This is where the name of the table comes from. A horizontal row of elements is called a period. A vertical column is a group.
The vertical columns are called groups and the horizontal rows are called periods. Note: It should not be vertical rows or horizontal columns
The horizontal rows on the periodic table are called periods.
Horizontal rows are called Periods, while vertical columns are called Groups.
The vertical beams are actually called groups and are used to determine the valence of an element (except for transition metals)