No, on dc the power is measured by the produce of the voltage and current so there is no need for a wattmeter, which would not work on dc anyway.
No
bungaw..
The 'one wattmeter method' can only be used for balanced, wye-connected, loads where the load's neutral point is accessible. The wattmeter's current coil is inserted into any line conductor, and the voltage coil is connected between the same line and the neutral point. The wattmeter reading indicates the power of one phase, so the total power is three times the wattmeter reading.To measure the total power of a balanced or unbalanced wye- or delta-connected load, it is only necessary to use twowattmeters -this is called the 'two wattmeter method'. In this case, the current coils of each wattmeter are inserted into any two line conductors, and the voltage coils are connected between the two line conductors and the third line conductor. The sum of the two wattmeter readings will indicate the total power of the load.
A wattmeter is designed so that it measures the supply voltage and the in-phase component of the load current. The product of these two quantities is the true power of the load.
this works with both.
It's cheaper.
no load means the motor is acting like a coil
No, on dc the power is measured by the produce of the voltage and current so there is no need for a wattmeter, which would not work on dc anyway.
To ensure that the relative directions of the current passing through the current and voltage coils result in the meter reading 'upscale'.
The advantages of wattmeter include adequate for low frequencies, easy to operate and better technology. There are different types of wattmeter and each has specific advantages.
No
bungaw..
Blondel's Theorem states that you can have one less wattmeter than there are conductors supplying a balanced or unbalanced load. In either case, the sum of the wattmeter readings will give you the total power of the load.
221
JAMES WATT
Wattmeter is an intrument which is used to measure the power consumption of an Electric circuit or an appliance which is connected to the supply in terms of Watts.