0
The adapter sleeve is typically used when the bearing is on a shaft without a shoulder and needs to be placed properly in a pillow block housing for example. This sleeve uses a hydraulic or mechanical device or nut to tighten the bearing on the sleeve and hydraulic oil injected into the end of the sleeve on larger sizes to release bearing when removing.
The withdrawal sleeve is used when the bearing is installed against a shoulder on the shaft and pushes the bearing against the shoulder while tightening. The advantage of this is the bearing can be installed with the shaft out of the machine since it is pressing against a shoulder, with the adapter sleeve, it would be more difficult to position the bearing with the shaft out of the machine since it is free to move on the shaft until it is tightened.
The choice of which to use will depend on the design of your shaft and how it will be installed. The attached document shows the mounting and dismounting methods of both sleeves and will probably answer many of your questions.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the difference between adopter sleeve and withdrawal sleeve?
speling:)
Can any 9v 500mA adapter replace any other 9v 500mA adapter?
No. There is a 50/50 chance it will work. Check the polarity on the label. Some adapters have the positive on the outside sleeve of the plug, others use the center portion. The device may be labeled, or use Google to locate the correct adapter for it. If you use a plug with the wrong polarity it might fry your device.
What is a pagoda sleeve?
A pagoda sleeve is a funnel-shaped sleeve arranged to show the sleeve lining and an inner sleeve.
What are the basic types of sleeves in garment making?
THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE
Why are there long sleeve and short sleeve shirts?
Long sleeve shirts are smarter. Short sleeve shirts are cooler in summer.
What are the Types of sleeve?
The types of sleeves are: no sleeves,spaghetti strap (thin or thick), short sleeves,3/4 sleeves, and long sleeves.there is also bishop sleeve, lantern sleeve, shirred sleeve, bat-wing sleeve, saddle sleeve, french sleeve
What is tat sleeve?
Tat sleeve
How do you change the left hand gearbox mount on an 87 golf cabriolet?
If memory serves the '87 has a solid mount system that is a rubber unit that is molded inside a steel sleeve. Support the engine /tranny with a jack. Remove the chassis bolt that goes through the center of the mount and chassis ear lugs. Remove the bolts that hold the mount and it's adapter to the transmission. Use a hacksaw to cut a slot on the inside sleeve of the mount, just cut the sleeve not the mount adapter. When cut us a hammer to tap the mount out of the holder. Make sure you make a note of the proper orientation of the mount. Position a new mount insert on the adapter and use a 6-10 ton hydraulic press to drive the mount insert into the adapter. Don't try to use a hammer, you'll just bugger up the mount and have to redo it anyway. Installation is the reverse of removal. When done loosen all mount center bolts and start the engine so it will align properly. Shut it down and re-tighten the mounts.
What is the Spelling of case withdrawl is it withdrawal or withdrawal?
The correct spelling is "withdrawal."
What is the plural of sleeve?
The plural of sleeve is sleeves.
What is the difference between full sleeve and half sleeve tattoos?
Tattoos can be applied to one's arm in full sleeve or half sleeve applications. The main difference between full sleeve tattoos and half sleeve tattoos is how much tattoo covers the arm.
Proper positioning of stripes Right sleeve or left sleeve...distance from end of sleeve?
Hash marks, denoting service time, are placed on the left sleeve.
