An antenna switch is a switch which allows a person to select which antenna to use with a transmitter, receiver or transceiver.
Antenna TV is just a bunch of channels that you can switch between.
The motor that raises and lowers the antenna is controlled by a wire which is connected to the power switch in the stock radio. The wire from the antenna itself has nothing to do with raising and lowering the antenna. Touch the wires that were connected to the stock radio to a hot wire and see if the antenna starts to move. If if does, hook that wire to the wire from the new radio which is supposed to control the antenna motor. If there is no such wire, connect the antenna motor wire to the Accessory circut. The antenna will go up whenever the key is turned on. Or, you can get fancy and install a switch for it.
The motor that raises and lowers the antenna is controlled by a wire which is connected to the power switch in the stock radio. The wire from the antenna itself has nothing to do with raising and lowering the antenna. Touch the wires that were connected to the stock radio to a hot wire and see if the antenna starts to move. If if does, hook that wire to the wire from the new radio which is supposed to control the antenna motor. If there is no such wire, connect the antenna motor wire to the Accessory circut. The antenna will go up whenever the key is turned on. Or, you can get fancy and install a switch for it.
The motor on the antenna is probably bad or if it goes up it could be a bad switch.
The antenna relay is on the power antenna itself(in the trunk.) a wire goes from the radio harness to tell the antenna there is power to the stereo and then the antenna goes up when it gets that signal(just by the 12volts going to the relay.)
yes that is it
You can still watch your local news without an antenna, as all satellite packages will carry a local channel listing.
You would need to run the Cable co-ax into a splitter switch, and connect the HDTV antenna to the other side.
1. Buy a Terk antenna. I have tried 4 other brands and there is no comparison. 2. Move the TV or antenna to eliminate interferance. Floresant lights or nearby metal will cause the signal to vary. 3. Connect the antenna then use your TV "menu" to tell your set to use the antenna input. Then choose "auto-program" to let your TV find signals. 4. For many channels, you have to turn the antenna or adjust the sensitivity switch.
To install an automatic antenna tuner you will have to call the dealership to get the part. You will have to turn the power switch off, remove the screws on the top case, turn the backup switch off and remove the backup battery. Turn the power switches back on and screw the top case back on.
Generally speaking, VHF or UHF radio. VHF is also used to communicate with ground personnel (heli logging, SAR, firefighting, etc). The 'system' consists of a radio, antenna cable, and external antenna. an intermediate antenna switch can be used to allow multiple radios of the same band to use the same external antenna.
No. They can be circularly polarized with the correct phasing harness, or used as a way to switch between horizontal and vertical polarization with one antenna. No. They can be circularly polarized with the correct phasing harness, or used as a way to switch between horizontal and vertical polarization with one antenna.