Clear the pistol of all ammunition, remove magazine. Remove slide. Press extractor pin out with a pin punch. This will release extractor and extractor spring. Insert extractor spring and new extractor, press into place, hold while reinserting extractor pin. Or replace it- a new one costs what a gunsmith will charge to repair one.
Remove bolt and secure it in a padded vise with the open end of extractor facing away from you. Take a pair of need-nosed pliers and position each jaw on the edges of the extractor. Give the pliers a firm rap and the extractor will dislodge from the bolt.
Soxhalation refers to the use of a soxhlet extractor. A soxhlet extractor is a piece of laboratory apparatus designed for the extraction of a lipid from a solid material.
Absolutely you can use a screw extractor to help you remove a screw that has broken off below the surface and you have no alternative to remove them. Here is a website that walks you through the process. http://www.wikihow.com/Use-a-Screw-Extractor
Extractor.
It is a tool that can grab the stud or what's left of it and remove it.
Search for "stud extractor". Looks like a drill bit but the cutters are left hand thread, designed to be used with the drill in reverse. The lid of the box or the extractor should be marked to indicate a) the screw size they are designed to extract b) the drill bit size you use to drill a hole for the extractor. Before you start apply some penetrating oil. 1) Select the correct extractor for the bolt size. 2) Use a punch to make a dimple in the centre of the snapped shaft. 3) Drill a pilot hole a few mm deep with a drill. 4) Put the drill in reverse with the extractor in it. 5) Put the extractor in the hole and go for it. 6) If that doesn't work buy "freeze and release" spray and use as instructed then repeat 5).
By removing the combs from the hive and then putting them in an extractor specially designed for that purpose.
threaded pipe use an extractor
With a extractor
A comedone extractor is a tool to remove blemishes, such as blackheads, pimples and whiteheads. The tool has one or two looped ends, with one of them usually ending in a sharper point.
a tooth extractor is basically a gadget that dentists use to remove you tooth/teeth... some of my friends got there teeth extracted and they said it hurts really bad!