To get all the audio voltage from a source to a target without loss you need voltage bridging, that is a relative low output impedance to a higher input impedance. Usualy the input impedance is at least ten times higher then the output impedance.
An input impedance is called also a load impedance or an external impedance.
An output impedance is called also a source impedance or an internal impedance.
In audio the input impedance of an amplifier is between 10 kiloohms and 20 kiloohms.
To have digital to audio played back it has to be changed back to analog with the use of a DAC or digital to analog converter. The DAC will take the digital signal and try to recreate it as a analog signal.
To get all the audio voltage from a source to a target without loss you need voltage bridging, that is a relative low output impedance to a higher input impedance. Usualy the input impedance is at least ten times higher then the output impedance.An input impedance is called also a load impedance or an external impedance.An output impedance is called also a source impedance or an internal impedance.
Impedance is the complex form of resistance. Impedance takes into account capacitance and inductance in a circuit as well. Impedance can be represented as resistance as a function of frequency.See link.AnswerImpedance is not a 'complex form of resistance'. It is the vector sum of a circuit's resistance and reactance. In electrical engineering, 'resistance' has a very specific meaning, and cannot be used to denote 'opposition'.
First, you must know: There is no 4 ohm amplifier. All audio amplifiers have an output impedance of smaller than 0.5 ohms. So you use impedance bridging. No problem to connect the 0.5 ohm output to your 4 ohm loudspeaker. Scroll down to related links and look at "Impedance bridging - Wikipedia".
Yes, the microphone or line in -input converts your analog signal into digital.
No. S/PDIF carries only compressed digital audio, although it sometimes uses analog connectors.
impedance. An analogue signal, does not have a data, or sample, rate.
There are speaker cables, unbalanced analog cables, balanced analog cables, coaxial digital audio cables and optical audio cables.
In audio the input impedance of an amplifier is between 10 kiloohms and 20 kiloohms.
In analog ckt there is more distortion but in digital there is no distortion. Analog is a continues value digital is a discrite value(0 or 1). To measure analog is very difficult but in digital it is very easy. compare to analog the digital system is very compart for us. H.L.Kiran
A digital audio jack serves the same purpose as an analog audio jack, only it transmits a signal that is digital (1s and 0s) instead of analog (waveform).
To have digital to audio played back it has to be changed back to analog with the use of a DAC or digital to analog converter. The DAC will take the digital signal and try to recreate it as a analog signal.
As compared to digital audio which consists of a stream of 1's and 0's, analog audio is transmitted via a physical quantity, such as a voltage. Analog recordings are physically stored, for example in a vinyl record, the record face consists of small pits and valleys that are then converted into sound. Fluctuations in electrical or magnetic fields is another method of storing analog audio.
Soundcard. It is a direct analog connection to audio out.
analog audioRefers to recording audio in a format of continuous vibrations that are analogous to the original sound waves. Before audio recording became digital, sounds were "carved" into vinyl records or written to tape as magnetic waveforms. Contrast with digital audio
Bluetooth is a digital communication interface. It tends to be used for audio signals more than other applications so it is often perceived as carrying analog audio. Despite the appearance, it is definitely digital and not analog.