Another name that can be used for a single-strand wire is thread or strand.
25 percent larger wire for 50 feet.
Check the nameplate on the welder, if the voltage that runs the welder is 240 volts then the two black wires connect to a 240 volt supply and the green wire connects to the ground of the supply.
Wire size depends on amps. Use #10 for 30a. #8 for 40 or 50a. #6 for 60a.
Without the amperage the device uses this question can not be answered. The size of wire depends upon the amount of amperage a device draws. The voltage is independent of the size of the wire, it is an insulation factor. Most commonly used wire is rated at 300 volts.
The wire feed welder is a MIG welder.
The wire size depends on the amperage, not the voltage. The fact that the welder runs on 440 volts does not affect the wire size! You need to ask this question instead: What size wire do you need for a three phase welder on an eight foot run if the nameplate amps are 45A?
Another name that can be used for a multi-strand wire is a cable.
The other welder will also fail.
Another name that can be used for a single-strand wire is thread or strand.
25 percent larger wire for 50 feet.
a stick welder needs to replace his electrode regularly and the flux coating is on the outside while a tig machine constantly feeds the wire and the flux is produced by a filler gas
that depends on the size of the welder. some welders can be used with a 110V outlet and others need a 220V. the size of the welder is the decider on that. Tech Ed Ted
Welder slag is a byproduct resulting from the welding process, often forming a layer on top of the welded joint. It consists of the residue from the flux used in the welding rod or wire, which helps protect the weld pool from impurities and contaminants while it cools. Slag is typically removed after welding to inspect the quality of the weld and ensure proper fusion.
there is no such thing as a gasless mig welder because mig stands for metal inert gas. you must have tubular wire which has the flux in the wire. i would say you should get some s wire to do the job
Steel wool.
Yes it can. I use flux core wire because there is no need for gas with flux wire.