Type your answer here... what is another term for combution chamber in a furnace or fire place.
fire pit
Does Carbon Monoxide Smell? No, carbon monoxide has no smell. Carbon monoxide is an odorless, colorless gas thatβs a byproduct of combustion. As a homeowner, this means it can leak from your gas furnace, stove, dryer, and water heater as well as wood stove/fireplace. The fact that carbon monoxide has no smell, color, or taste makes it impossible for us to detect. This gas is an unseen risk, the exposure to which may prove fatal. To keep your family safe, itβs important to identify all the possible sources of CO in your residence and to properly install and maintain carbon monoxide detectors in your home.
In cfbc boiler fuel system like a very important funtion of in all process. fuel feeding have two types one is over beding system and other one is under bed system.In over bed system coal is carried by conveyer belt from bunker to spreader that's time coal size approx 6-10 mm crushed.spreader distribute coal on the surface of bed uniformly.This type of fuel feeding system accept over size of fuel also.In compared with under feeding system this is more reliable.Now these days have some boiler have both feeding system.In under bed feeding coal size crushed approx 1-6 mm which is throw from conveyer to combustion panel.
A non-adaptive robot is that will follow the instructions it is given despite changes in the environment. It will only stoop until it is shut it down by a human operator. Non-adaptive robots are also known as open-loop systems, as they don't receive feedback from the environment and is hence incapable of making decisions and altering the output Non-adaptive robots are commonly used in the industry for many tasks, including welding a spot, putting steel into a furnace and drilling a hole. They may be reprogrammable, which means that they may alter their tasks by accepting new instructions. This is, however, only possible when the robot is equipped to perform the new task.
Unbolt the burner and slide it out of the way.
fireplace
what is the purpose of refractory lining in furnace
If both fireplace and furnace are BOTH gas, if the flue has the correct size, AND if your building code permits, yes. If furnace and fireplace are different fuels, no. Check with your local building inspection department.
Furnace it has to reach much higher temperatures than the fireplace
Proper ventilation, and no leaks in the exhaust. Hopefully your furnace is also drawing outside air to the combustion chamber instead of inside air (the way that older furnaces worked).
An ordinary furnace is not an engine at all, because it does not directly cause mechanical motion. The heat or expanding gases released in a furnace can be used to drive an engine, but that is a separate component from the furnace. If a furnace is used in this manner, the engine is an external combustion engine.
My oil burner firebox ceramic liner has places where the liner has flaked off and needs to be realigned. How do you do that and where'd you get the materials?
A furnace or fireplace or the ash dump box.
Furnace is an enclosed chamber in which heat is produced
An ordinary furnace is not an engine at all, because it does not directly cause mechanical motion. The heat or expanding gases released in a furnace can be used to drive an engine, but that is a separate component from the furnace. If a furnace is used in this manner, the engine is an external combustion engine.
Carbon Monoxide poisoning.