I think that pertains to your exhaust system from the " axle back "
I think that pertains to your exhaust system from the " axle back "
if its a double axle at the back it is a 7.5 tonne and if a single axle at back its a 3.5 tonne
if its a double axle at the back it is a 7.5 tonne and if a single axle at back its a 3.5 tonne
This would be the exiting of the tailpipes area,ie:behind the rear axle.
A ten foot spread axle trailer is allowed 20,000 lbs. per axle, for a total of 40,000 lbs.
its located on the back axle on the axle housing
To replace the axle on a 1993 Honda Civic the axle nut has to come off. The hub assembly also will need to be pulled back so the axle can be pulled from the transmission.
at list 60% back from the frount
At the tip of the axle that goes into the transmission is a snap ring. Make sure this clip has the open end pointing down or you will have problems with insertion.
take back plate off of the rearend pumpkin and there is a horseshoe clip at the end of the axle inside the rearend that has to come out and then the axle will pull out.
When the car backed up and the back wheels slipped into the ditch, the rear axle was damaged.
in the back axle