plug the cable back in
You don't use a USB CABLE. You use an ethernet cable from the back of your computer and plug it in the back of your XBOX360 to have XBOX LIVE. :)
Buy the Cable , then remove the screws that hold the broken cable and attach the new cable back.
if it has a separate cable both ends of the cable are male and in the back of the computer and the back of the monitor is female
Attaching a cable from point to point. Such as connecting a cable from the Cable t.v. outlet in the wall to the back of your t.v. Not wireless.
, The cable box communicates back to the computer system at the cable company, and that's about all it does. It'll send back info like a PPV movie you ordered with your remote control, subscription to special events, etc. It's what you would call a closed system.
To change the antenna cable on a 1998 Buick LeSabre Limited, a person has to unscrew the old antenna cable from the back of the radio. Then pull the antenna wire out from under the dash and follow it to the antenna. Unscrew the old cable from the antenna. Screw in the new cable and thread it back under the dash in the same path as the old cable and screw it to the back of the radio.
for microphones.
It goes in the port with the name Internet on it.
Some screw on. Some have a nylon clip that snaps into place when you push the cable on the speedo.
the red cable if there is no red cable usuallly the thicker cable is positive if that does not work look under your vehicle for the starter and fallow the thick wire back to your battery and that is you positive cable.
If you have analog cable TV, plug the coaxial cable coming from the wall plate directly into the back of your television. You should see a silver coax input on the back of your tv.