it's 00000111 binary = 07 H
One is suppose to reset the fit bit to set up the charge HR.
I think I know what you are asking. PowerPoint uses 96 ppi standard. So set your ppi in photoshop to 96 ppi also. That should keep them the same when you copy/paste into each other.
A register is said to be bit addressable if it's individual bits can be set or reset . e.g, let us suppose we have a 8 bit register named D being d7d6d5d4d3d2d1d0 then it is said to be bit addressable if i can set or reset bit dx using some instruction , e.g in 8051 SETB and CLR are used for this purpose , SETB D.1 makes d0 1 , CLR D.4 makesd3 0.
No, the correct term is "reset". That's because the past participle of the verb "set" is just "set" itself (e.g. "I have set ..."). Since "reset" is based on "set", its past participle is also "reset".
The 8085 microprocessor has 5 flags: 1. Zero flag: The zero flag is set, when the ALU operation results a zero . 2. Carry flag: If an arithmetic operations results in a carry, this flag is set. 3. Parity flag: This flag is set, when an arithmetic or logical operation results in a data, which has even number of 1s. If otherwise, it is reset. 4. Sign flag: After the execution of an arithmetic or logic operations, if D7 bit of the accumulator is 1, it indicates a negative number and this flag is set. If otherwise, it is reset. 5. Auxiliary Carry flag: used for BCD Operations, During the BCD operations, if D3 bit producing the carry then the AC bit set as1, otherwise the bit is 0. 6. Carry Flag: when a carry is generated by digit D7, then the carry flag set as 1, otherwise the bit will be 0.
set reset flip flop
To reset something is simply,putting it back to how it started,and to set something is to make it right,ie to set a watch
The three forms are the same: reset, reset, reset.This is true for 'set' (or put or hit, etc.)
just re-set it by going to reset? obviously
The "RS" in RS flip flop stands for "Reset-Set". The RS flip flop has a Reset and a Set input. You can reset or set the flip flop as desired. Output state will be held based on whichever input was last asserted.
The "Maintenance Notice" screen will be reset when: "Reset Distance" is selected, or "Interval Reminder" is set to off.