A capacitor builds a charge and then discharges it, all at once, unlike a battery that will release it's charge slowly. To capacitate is to discharge an aggregate charge or volume and suddenly release it.
in FV analogy, mass is analogous to inductance
In case of DC: because the frequency of dc current is zero capacitive reactance ( Xc) = 1/2(22/7)fc f= frequency c=capacitence and when Xc=0 this implies that I=0 In case of AC: Xc >0 => I>0
You need more information than this to find your solution. There will be a a value for the electric field at which point the air will break down. you also need the area of one of the capacitors and the capacitence
Definitely not possible. Capacitance is given by an expression C = epsilon x A / d Since charge is not present the capacitance cannot be increased or decreased by the charge placed
Let K1 & K2 be the equivalent capacitence in series and parallel resp. if c1 and c2 b the values of capacitor we have 1/c1+1/c2=1/6 c1+c2=25 solving we get c1=10 MF c2 =15 MF or vice cersa
Because without friction static electricity can't exist. As the friction occurs it builds up the potential in anything with any kind of capacitence until you give it a path to ground (i.e..your light switch or metal plate). That's when you get your telltale "snap". Hundreds even thousands of volts can be built up. No amperage however, otherwise our lives would be endangered every time we drug our feet across the carpet in slippers :)
Actually, neither d.c. nor a.c. current passes through a capacitor. A.C. current 'appears' to flow through a capacitor but, in reality, it is only flowing through the connecting circuit while what is known as a 'displacement current' (actually, a distortion of the atoms' shells rather than a conduction current) occurs within the dielectric separating the capacitor's plates. D.C. current is 'blocked' by a capacitor because, when the capacitor is fully charged, the potential difference appearing across its plates is equal and opposite that of the supply. With no net potential difference in the circuit, no current can flow.
Electrolytic capacitors are used for power filter, decoupling, signal coupling and time constant setting, DC blocking, etc. Polarized electrolytic capacitors usually play a role in power supply circuits or intermediate frequency and low frequency circuits for power supply filtering, decoupling, signal coupling, time constant setting, and DC blocking. Generally electrolytic capacitors cannot be used in AC power circuits. When used as filter capacitors in DC power circuits, its anode (positive) should be connected to the positive terminal of the power supply voltage, and the cathode (negative) should be connected to the negative terminal of the power supply voltage. Otherwise it will damage the capacitor. We're JYH HSU(JEC) Electronics Ltd (or Dongguan Zhixu Electronic Co., Ltd.), an electronic components manufacturer. You may google search "JYH HSU" to find our official website.