You need more information than this to find your solution.
There will be a a value for the electric field at which point the air will break down. you also need the area of one of the capacitors and the capacitence
If you mean the capacity of the capacitor then, Factors are:- Area of of overlap of the plates Separation of the plates How good is the insulating material between the plates (the dielectric) If you mean how large a charge can be stored then, Factors are:- The capacitance of the capacitor (C). The applied voltage (V). Charge Q =CxV V cannot exceed the dielectric's breakdown voltage.
The main role of dielectrics in capacitors is to increase the value of capacitance of the capacitor.
Plastic dielectric
Capacitor
A capacitor, in its simplest form, is two conductive plates separated by a dielectric.
The dielectric,usually the insulator between the plates of a capacitor, can be overstressed by the application of too high voltages applied to the capacitor plates. The dielectric breaks down and a current flows between the plates until,either they are discharged, or an equilibrium is reached,below the working voltage of the capacitor. If the dielectric is damaged in this process he capacitor must be replaced. Some dielectric material self heal and can recover from an over voltage.
If you mean the capacity of the capacitor then, Factors are:- Area of of overlap of the plates Separation of the plates How good is the insulating material between the plates (the dielectric) If you mean how large a charge can be stored then, Factors are:- The capacitance of the capacitor (C). The applied voltage (V). Charge Q =CxV V cannot exceed the dielectric's breakdown voltage.
The dielectric material between the plates.
The term for the flow of electrons through the insulating material of a capacitor is called "dielectric breakdown."
When the plate separation of a capacitor is doubled, the potential difference across each capacitor remains the same.
Magic. Look up capacitors on wikipedia!!A capacitor stores electrical charges in its plates.Both wrong. A capacitor stores energy as an electric field developed in the dielectric between its plates. A good dielectric with high permittivity (once called dielectric constant) concentrates this field, allowing more energy to be stored in a capacitor having the same plate area and separation but a dielectric of lower permittivity.
A paper capacitor is a type of capacitor that uses paper as the dielectric material between its conductive plates. The paper is impregnated with a dielectric such as oil or wax to improve its insulation properties and prevent breakdown. Paper capacitors are low-cost, reliable, and suitable for use in low-voltage applications.
capacitors are classified on the basis of dielectric material used inside it. For example the electrolytic capacitor consist electrolyte as dielectric mica capacitor consist mica as dielectric between plates and ceramic capacitor consist ceramic as dielectric.
Yes possible. As a capacitor even with air as dielectric allows alternating current to pass through the capacitor filled with some material as dielectric would allow current to pass through it
Capacitors are named after their dielectrics. So, an 'air capacitor' uses air as its dielectric, a 'mica capacitor' uses mica as its dielectric, and so on. There are lots of different dielectric used to separate the plates of a capacitor, each with different permittivities and dielectric strengths. As the perfect dielectric (i.e. one with both a very high permittivity and a very high dielectric strength) doesn't occur, the choice of dielectric is always a compromise between it permittivity and dielectric strength.
The charge in a capacitor is between the plates. The dielectric is only an insulator that allows the plates to be very close without touching and discharging the charge. There is no battery in a capacitor.
The capacitor will hold the charge, until it leaks off due to resistances in the dielectric or external.