A continuous rattling sound as of hard objects falling or striking each other.
The shiny ocean that is called sea world?
Probably music that is made using the clinks and clatters of washing things in the kitchen sink. Not sure though...:/
Depends on the car. Mark your present timing place. Then advance timing until it clatters(spark knocks) then retard it until it does not. Vehicle will have a miss while running, usaually getting worse at higher rpms Depends on the car. Mark your present timing place. Then advance timing until it clatters(spark knocks) then retard it until it does not.
With the engine at operating temperature back off the rocker arm until it slightly clatters. Tighten it down slowly until the valve is quiet and then tighten it 3/4 of a turn more.jd
The student hit the fire alarm to make them rain upon the school.
The timing setting given is the most common for the 327. If, during a test drive, the engine seems a little sluggish, you can move the timing up two degrees to "6 BEFORE." If the engine clatters when you accelerate, move the timing down towards the "0" by two degrees.
Hey Twlia==It may be the gas yoou are running or the timing too fast. Try running 93 octane gas and see if it dquits. If it does, you may want to have the timing checked. If the timing is ok, unless it clatters all of the time, I wouldn't worry with it. GoodluckJoe
Most Chilton's, Motor's, or Haynes book should include detailed instructions on how to adjust the valves. With the engine running, back off the rocker nut until it clatters. Tighten it back down until the clatter is gone then tighten it 1/2 turn more. Any tighter will possible cause it to run rough or miss.
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 13 words with the pattern C--TTE--. That is, eight letter words with 1st letter C and 4th letter T and 5th letter T and 6th letter E. In alphabetical order, they are: chattels chatters chattery chitters clatters clattery clitters clotters clutters cluttery coattend coattest critters
A candle clock is a thin candle with consistently spaced markings (usually with numbers), that when burned, indicate the passage of periods of time. While no longer used today, candle clocks provided an effective way to tell time indoors, at night, or on a cloudy day. A candle clock could be easily transformed into a timer by sticking a heavy nail into the candle at the mark indicating the desired interval. When the wax surrounding the nail melts, the nail clatters onto a plate below.
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 6 words with the pattern CL-T-ER-. That is, eight letter words with 1st letter C and 2nd letter L and 4th letter T and 6th letter E and 7th letter R. In alphabetical order, they are: clatters clattery clitters clotters clutters cluttery
Run the engine until it reaches operating temperature. Remove one valve cover. Use a socket wrench . There are gizmos that you can put on the end of the rocket arms to help with the mess. start the engine. Loosen one rocker stud nut until it clatters. Slowly tighten the stud until the clatter stops. Now tighten the stud nut. 3/4 turn 1/4 turn at a time. repeat this for the rest of the rocker arms. Replace the cover and repeat on the other side. Expect a mess.
Warm up engine. With the valve cover removed, loosen one rocker arm at a time until it clatters. Now, slowly tighten that rocker arm until it stops and give it a 1/4 turn. Go to the next one. That's it. You'll make quite a mess that way, but it will work if you don't mind oil all over yourself and the car. Check out the article I wrote on this topic for the details on how to do this without the engine running. http://www.classiccarauto.com/impala/how_to/adjust_valves.shtml