Want this question answered?
420i.
Fn T
Fn T
60 ( ft. lbs )
Inside the lower part of the engine. The pistons are connected to the crankshaft by way of connecting rods. The crankshaft is what turns the flywheel, torque converter, transmission, and ultimately the drive wheels. Look of the top of the transmission bellhousing. Sorry, I thought you meant crank sensor. It is that main shaft the runs through the bottom of the engine block from the front to the back of the engine, and is connected to the pistons. You cannot see the crankshaft without taking the engine apart, but you can see the crankshaft pulley, which is the pulley that attaches to the front end of the crankshaft, and drives the serpentine belt, which drives all the accessories, like the alternator, power steering pump, etc. The crankshaft pulley is the very bottom pulley, when you look at the front of the engine.
The torque value is 100 ft.lb. or 136 n.m.
yes
The most logical reason for the key or tip as you call it breaking off is probably a result of improper torque on the crankshaft pulley or the crankshaft pulley is out of balance.To prevent this I would highly suggest buying a new crankshaft pulley that will be balanced.To explain what happens over time the strain of adjusting the belts from the alternator and power steering and air condition pull the crankshaft pulley with varied tension and can cause the crank pulley to warp to a degree causing it to be unbalanced.While this may seem a bit strange the metal will be affected by this due to age,temperature,torque from the belts tensions pulley left and right.Best bet buy a new crankshaft pulley (note just look at the pulley while idling and see if is wobbling) this will tell you the pulley is warped or out of balance.Plain and simple!
It depends on the engine, and is always stated in the vehicle manual. ( which is one excellent reason for always using the relevant manual when working on things you don't know about ) . -On most of the cars I have worked on the crankshaft pulley is tightened to between 95 and 110 foot pounds.
which direction does a crank shaft pully bolt screw out on a 2002 honda accord lx 2.3l eng. clockwise or counterclockwise?
A crank pulley also known as a crankshaft pulley is an essential part of a car. It transmits the mechanical power and torque, or the force of motion, through the pulley system to additional car elements.
92