0
What else can I help you with?
Where would you look to see if the device drivers are properly loaded?
You need to look in the device manager. Click start -> control panal -> system -> hardware -> device manager From there you can see which drivers there are errors on and you can reload or remove driver.
Would you expect all the devices listed in BIOS Setup to also be listed in Device Manager?
Yes. Any device that shows up in BIOS setup should also be listed in Device Manager.
Windows 9X allows you to see the IRQ assignments?
it is device manager
How open device manager in win xp?
Fastest way is to right-click on My Computer, click on Properties, then click on Hardware Tab, then you will see Device Manager.
How can you tell when a device was attached to your computer?
Go to device manager and you see all the devices attached and their status and properties
How do you check to see if your laptop has a wireless card installed?
You could look for it in device manager.
Would you expect to see all devices that is in the device manager also in the BIOS?
yes
What is the difference between usb host controller and usb root hub in device manager. If you have 4 usb ports on your PC how many such entries would you see in device manager?
Stephen Slavin
How do you check to see if your computer is capable of receiving things via bluetooth?
You need to go into Device Manager. You will see Network Adapter. Click on it and if you have Bluetooth is will be displayed as a Bluetooth device.
What Windows utility allows you to directly see the IRQ assignments made to devices?
Device Manager :)))
How do you fix a computer device driver code39?
To start troubleshooting, follow these steps: # Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform some recommended resolutions through Device Manager. ## Right-click My Computer, and then click Properties. ## Select the Hardware tab, and then click Device Manager. ## Double-click the device type that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.A list of devices appears. If a device has problems, the device has a red exclamation point next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it. ## Right-click the device that has the problem, and then click Properties. This opens the device Properties dialog box. You can see the error code in the Device status area of this dialog box. # Use the Troubleshooting Wizard, if it is available, to help you diagnose and resolve your problem. ## On the device Properties dialog box, click the General tab. ## Click Troubleshoot to start the Troubleshooting Wizard. The wizard asks you some simple questions and provides a solution to your problem based on the answers that you provide. If the Troubleshooting Wizard is not available, go to step 3. ## Follow the resolution steps provided by the wizard to resolve the problem. ## Check the Device status area of the device Properties dialog box to see whether the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3. # If the Troubleshooting Wizard did not help you resolve your problem or was not available, locate your error code in this article.
In Windows XP Device Manager how do you uninstall a device?
You can't disable the device manager. However, only administrators have have the ability to change it. If you create a new account on your computer that doesn't have administrative abilities, then that suer won't be able to make any changes in the Device Manager.
