A mechanical stopwatch can measure a time interval of up to 0.1 seconds. It has a knob that is used to wind the spring that powers the watch. It can also be used as a start-stop and reset button. The watch starts when the knob is pressed once.
The Electronic Stopwatch keeps time for an unlimited number of splits and registers 1/100th for the first 30 seconds, and 1 second . thereafter for up to 24 hours. It includes a programmable alarm, and displays the current date, time and month.
A mechanical stop watch uses gears other moving parts to tell time, where a electronic stopwatch uses computer chips to tell time.
A mechanical stop watch can measure a time interval up to a minimum 0.1 second while electronic stopwatches commonly used in laboratories can measure a time interval as small as 1/100 or 0.01 second
A wristwatch is worn on the wrist and tells the current time. A stopwatch is held in the hand, and is used to time the duration of an event. A wristwatch is always running, telling the time. A stopwatch is started and then stopped.
Ima is Ideal Mechanical Advantage and Ama is Actual Mechanical Advantage. The difference is that IMA doesn't take into account elasticity or friction and AMA does.
Mechanical waves require a medium to travel, where electromagnetic waves do not.
do the hockey poky and that's what it is all about
the difference between the real mechanical advantage and the speed ratio is -the real mechanical advantage gets affected by friction so the real mechanical advantage gets smaller than the mechanical advantage you calculate. so the real mechanical advantage gets smaller than the speed ratio (because of the friction) and that's why the efficiency never gets 100% efficient (efficiency ; mechanical advantage/ speed ratio x 100(%))
An electronic stopwatch gives a higher accuracy than a mechanical stop watch.
In an electronic switch there are no mechanical/moving parts - the switching action is achieved entirely within the electronic components. Electronic relays are generally a mechanical switch controlled by electronics.
The 3A has a mechanical distributor (points) and the 3AC has an "electronic" distributor.
A wristwatch is worn on the wrist and tells the current time. A stopwatch is held in the hand, and is used to time the duration of an event. A wristwatch is always running, telling the time. A stopwatch is started and then stopped.
The difference between an electronic organ and an electronic piano is in the sounds produced. Sometimes, on the higher end models, the electronic piano will have a piano touch, weighted keyboard.
The STD model is mechanical, the Celect and Celect Plus models use electronic controls.
?!
mechanical moves it self electrical bad noise
A manual database is MANUAL and an electronic is electronic LOL! Simple :P
MPPT (Maximum Power Point Tracking) is an electronic system that normally operates with PV module. In other word, it is not a kind of mechanical tracking system. Because MPPT is a fully electronic system that varies the electrical operating point of the modules so that the modules are able to deliver maximum available power and MPPT can also be used in conjunction with a mechanical tracking system, but the two systems are completely different.
SPELLING.
mechanical coupling can be called as a mechanical device which is used to connect two mechanical links as well as transmit power between them. mechanical joint is just used to joint two linkages . there is no power or torque transmission between them .