CAVITATION is the process of formation of vapour bubbles of flowing fluid in a region where the pressure of the liquid falls below its vapour pressure and the sudden collapsing of these vapour bubbles in region of high pressure.
where SUPERCAVITATION IS THE CONTROLLED FORM OF CAVITATION WHICH HELP US TO attain more underwater speed
yes
difference between clucth and coupling
difference between coupling and socket
Relation between phase difference and path difference is path difference/wavelength=phase difference/2*pi
Hydrodynamic Cavitation can occur in any turbulent fluid.The turbulence produces an area of greatly reduced fluid pressure. The fluid vaporizes due to the low pressure, forming a cavity. At the edges of the cavity, small amounts of vapor break off. These form smaller cavities 100 nm to 3 mm in diameter. The smaller cavities implode under the high pressure surrounding them. This process of formation and collapse is called cavitation.
The cavitaion index across a valve or pipe fitting is defined as the ratio of difference between upstream pressure and vapor pressure to the pressure drop across the valve or fitting. The index at which incipient cavitation, damage, or choked flow occurs is based on testing and depends on the type of valve or fitting.
Emerson Cavitation Tunnel was created in 1949.
A cavitation plate is the adjustable metal plate that runs along the bottom of the transom on a V-drive. Some people call the flat metal plate on an outboard or outdrive a cavitation plate but the correct name is anti ventilation plate and cavitation and ventillation are not the same. It is similar in function to Trim Tabs. A cavitation plate is used to adjust the trim of a V-Drive and keep the nose on the water. Here is a link to a picture on PerformanceBoats dot com In this picture of a V-drive, the cavitation plate is anodized red.
cavitation is caused when vapour pressure in the fluid in higher equal to the surrronding presure. in the case of centrifugal pump, when the hydraulic pressure (due to height) in the fluid falls below the vapour pressure of the fluid itself, cavitation wil occur.
Minao Kamegai has written: 'Underwater explosions and cavitation phenomena' -- subject(s): Underwater explosions, Cavitation
cavitation is caused when vapour pressure in the fluid in higher equal to the surrronding presure. in the case of centrifugal pump, when the hydraulic pressure (due to height) in the fluid falls below the vapour pressure of the fluid itself, cavitation wil occur.
due to pressure loss or sudden change in area the vaccum bubbles formed along with the inner surface of an ejector. it is known as ejectors cavitation.
Gunnar Lundholm has written: 'The circumferential groove journal bearing considering cavitation and dynamic stability' -- subject(s): Bearings (Machinery), Cavitation 'On whirl frequences and stability borderlines for journal bearings' -- subject(s): Bearings (Machinery), Cavitation
cavitation is the reason
Michael C. Brophy has written: 'A study of pump cavitation damage' -- subject(s): Pumping machinery, Corrosion, Materials, Cavitation
cavitation usually, or a thrown blade on the impeller.
to avoid cavitation