Resistance is a concept used for DC. the current through a resistance is in phase with the applied voltage
Reactance is used for AC
the current through a inductive reactance lags the applied voltage by 90 degrees.
the current through capacitive reactance leads the applied voltage by 90 degrees.
the net reactance is the difference between inductive and capacitive reactance
There is pure resistance, inductive reactance, and capacitive reactance.
"Opposition to current" can refer to resistance, reactance, or impedance.
Resistance, capacitive reactance, inductive reactance. Note: None of this is really a "force" - not in the meaning of "force" as used in physics.
Potential Difference (V) across two resistors is directly proportional to the resistance (R) as greater the potential difference, greater is the resistance and vice versa.
Wrinkle free and wrinkle resistance sounds same but there is some difference .
Resistance is constant no matter the frequency applied. Reactance varies depending on the frequency of the power applied to it.
resistance is the opposition to the flow of electric charge
Impedance is the net reactance(for Capacitors and inductors in the circuit) / Resistance of the circcuit whereas reactance is the prperty of the individual passive components ( only capacitors n inductors) to resist the flow of charge.
when ever current passing through any two parallel transmission line than due to the dieletric property of conductor some what capacitance effect will be generate between them that phenomina called as capitance reactance/////////////////// that symply we can called capitance reactance is measure of capitance The reactance of a capacitor is its resistance.
Impedance, resistance, and reactance.
Because it is. Capacitive reactance is a form of resistance, along with inductive reactance. All are measured in ohms.
A coil has both resistance and inductance. When you apply a d.c. voltage, the opposition to current is the resistance of the coil. When you apply an a.c. voltage, the opposition to current is impedance -the vector-sum of the coil's resistance and its inductive reactance. Inductive reactance is proportional to the inductance of the coil and the frequency of the supply.
Resistance applies to both d.c. and a.c. circuits, and is determined by the resistivity, length, and cross-sectional area of a conductor.In d.c. circuits, resistance is the only opposition to the passage of current. However, in a.c. circuits, the flow of current is opposed, not only by resistance, but also by reactance. Reactance is caused by a circuit's inductance or capacitance, or both, and varies with the frequency of the supply. Like resistance, reactance is also measured in ohms.So, in a.c. circuits, the combination of resistance and reactance is called 'impedance'.Impedance is not the algebraic sum of resistance and reactance, but the vectorial sum. So if, for example, an a.c. circuit had a resistance of 3 ohms and a reactance of 4 ohms, the impedance would be 5 ohms, not 7 ohms.
Resistance
x/r ratio is reactance/resistance where reactance is impedance * frequency (60 hz)
There is no physical relationship between resistance and capacitive reactance. But if someone tells you that the impedance of something: Z = 3 -4j, the real resistance is 3 and the reactive capacitance is -4.
The resistance of an a.c. load is called 'resistance' (R). Resistance is not affected by frequency, only by the cross-sectional area, length, and resistivity of the conductor. Having said that, because of the skin effect, which causes an a.c. current to flow closer to the surface of the conductor, the effective cross-sectional are is reduced, so the value of a.c resistance is somewhat higher than the d.c. resistance -this difference increases with frequency.The opposition to a.c due to inductive or capacitive loads is called reactance (inductive reactance or capacitive reactance), and the overall opposition to a.c. current is the vector sum of resistance and reactance, and is called impedance. That is:(impedance)2 = (resistance)2 + (reactance)2