it means that you digitize analog data for transmission . Like 2 computer that chatting .
Because in order to preserve the original sound, a digital sampling rate must be twice the frequency of the analog signalAnalog data is smooth and continuous, where as digital data, such as the binary data used in computers, has distinct gradations. The process of producing digital data by measuring data at a series of representative points is called sampling.
Get a digital to analog converter box or connect it to a digital DVD or vcr.
The digital tuner also demodulates the normal analog broadcasting. The tuner outputs a analog composite video signal to Video Processing Chip. In that chip, there is a ADC to convert the analog to digital, then after procession, display the content on the screen
Just as electric cable transmits electric line power from the transmission center to receiving station so the data cable in digital communication transmits the encoded binary digits from a digital transmission system to a digital receiving system.
The set top box that your provider gives you is what converts the Digital signal to the analog signal. The digital signal is compressed at the provider and sent to the end user. The "tuner" (which can be built into a tv, a set top box or a cable card) Then decompresses the digital signal and converts it into an analog signal. There is much more to this did not know how technical you wanted your answer.
n Digital data, digital signal n Equipment less complex and expensive than digital-to-analog modulation equipment n Analog data, digital signal n Permits use of modern digital transmission and switching equipment n Digital data, analog signal n Some transmission media will only propagate analog signals n E.g., optical fiber and unguided media n Analog data, analog signal n Analog data in electrical form can be transmitted easily and cheaply
A transfer of data from point-to-point is simplified as data transmission. Data transmission can be referred to as digital communication but can include analog data transmission as well.
There are four possible combinations of encoding techniques -Digital data, digital signal -Digital data, analog signal -Analog data, digital signal -Analog data, analog signal
For transmission through a radiowave.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Analog means continuous transmission of data whereas digital means discrete transmission of data. In analog communications we are transmitting finite amount of data in infinite amount of information. so,there is a possibility of occurrence of noise. where as in digital we are transmitting finite amount of data in finite amount of information. so , out of these two, digital is most efficient.
* Codec is for coding analog data into digital form and decoding it back. The digital data coded by Codec are samples of analog waves. * Modem is for modulating digital data into analog form and demodulating it back. The analog symbols carry digital data.
This is essentially the same question as the difference between analog and digital. With analog electronics a voltage is used to represent (or to be an analogy for) some physical attribute in the real world. So for an analog transmission, at its simplest, a sound signal (say) is converted to a voltage, the voltage sent down a cable, then at the other end the voltage converted back into sound with a loudspeaker. With a digital system, the physicial attribute is measured and sent as a series of numbers, the numbers being converted to binary. For a digital transmission, the sound signal is converted to a series of numbers, sent as binary, and converted back to a sound signal at the other end. The advantages of digital is that it makes multiplexing much easier - making it easier to put many signals down the same physical cable. It also makes compressing the signal much easier - this is particularly effective for digital television transmission; 30-40 digital channels can be sent over the same bandwidth as 4 or 5 uncompressed analog channels. Also, digital is much more resiliant against noise - the digital receiver has to make a decision about each bit - is it there or not; noise can be pretty extreme before this becomes impossible, with analog, once noise is added its very difficult to remove it. The historical disadvantage of digital is that digital encoding and decoding equipment was expensive compared with the analog. Over the last 10 years or so, digital electronics has become much cheaper and more powerful.
Analog transmission came before digital ones
These are all computer and technology terminology. Analog and digital signals are used for data transmission, and ADSL refers to an Asymmetric Digital Subscriber Line modem.