It is the ratio of the on and off time or the clock signal, which is generated by the clock generator...
duty cycle is the total on peeriod in one complete cycle.
Bus cycle is a single transaction between the main memory and the CPU.
The fetch-execute cycle of a typical microprocessor involves fetching an instruction from memory, determining what actions the instruction requires it to do, and performing those actions. It is also simply called the Instruction Cycle.
A T state is one cycle of the system clock.
Duty cycle is the fraction of time that a system is in an βactiveβ state. ... The transmitter runs for one out of 100 microseconds or 1/100 of the time, and its duty cycle is therefore 1/100, or 1 percent. The duty cycle is used to calculate both the peak power and average power of radar system.
Pulse width is the time in milliseconds that the injector is energized, the duty cycle is the percentage of on-time to total cycle time
#6 You can use number 6 copper if you wish,you will definitely not overload it or you can figure the wire size by the duty cycle. If your welder has a 100 duty cycle rating use wire good for 52 amps or a number 6. If the duty cycle is 90, multiply the amp draw by .95 x 52 or 49.4 amps or a number 8 wire. These are a few more of the duty cycle multipliers 80 duty cycle(.89) 70 duty cycle(.84) 60 duty cycle(.78)Duty cycle takes in to account that most welders do not weld continously at maximum welder output all the time.
The width of a pulse and power are related by a term called duty cycle. Full power means the pulse comes ON and Stays ON continuously for 100% duty cycle. No power means pulse is OFF continuously for a 0% duty cycle. 50% duty cycle means pulse stays ON half the time and OFF half the time. Duty cycle can be used to explain the relationship between pulse and power content.
First off, the Duty cycle is the proportion of time during which a device or system is usefully operated. For a mass spectrometer, the duty cycle is the part of ions of a particular m/z produced in the source that are effectively analyzed.
The docucolor Xerox has a maximum duty cycle (number of prints) of up to approximately 200,000 pages per month.
50%
This is called the duty cycle. A machine with a 60 o/o duty cycle can weld continuously for 6 minutes out of 10.