Resistance is the temporary blockage an electron encounters while flowing through a conductor. This is caused because the free flowing electron encounters another particle blocking its path. So when temperature is increased these particles vibrate at a pacing rate. So the electrons encounters more blockages than usual. When the temperature drops the particles vibrate the least and thus the electrons encounter lesser blockages.
It depends on the material. In metals, the resistance increases with temperature.
It varies. On some items resistance goes up, some it goes down when temperature goes up.
Factors affecting the resistance of a conductor include the material from which it is made, its length, its cross-sectional area, and its temperature.
IAT air intake sensor is a thermistor ( a resistor that varies the value of it's resistance in accordance with temperature changes ) the change in the resistance values will directly effect the voltage signal from the sensor to the PCM/ECM. As the sensor temperature increases, the resistance values will decrease. As the sensor temperature decreases the resistance values will increase.
Yes. The exact effect - whether it increases or decreases - depends on the material.
Positive Temperature coefficient indicates that the resistance of material INCREASES with rise in the temperature. Resistance Temperature COefficient(RTC) is defined as increase in resistance per unit original resistance per unit rise in temperature. Temperature Coefficient of Resistance=R2-R1/(R1*(T2-T1)) Where: R2:Resistance at temperature T2 R1:Resistance at temperature T1 SO from formula it is clear that if resistance increases with temperature(T2-T1>0 and R2>R1) then Difference R2-R1 will be positive hence RTC will have positive value. But if with increase in temperature(T2-T1>0) resistance decreases(R2<R1) then difference R2-r1 will be negative hence RTC will be negative.
The electric resistance is related to the diameter and extension of the wire submitted to a determined voltage which will determine the electric current flowing into the wire.AnswerVoltage has no effect on resistance. Resistance is determined by the length, cross-sectional area, and resistivity of a material (resistivity is affected by temperature, so temperature indirectly affect resistance).
with increase temperature in metal, thermal energy causes atoms in metal to vibrate, in this excited state atoms interact with and scatter electrons, thus decreasing the mean free path, and hence the mobility of electrons to decreases and resistivity increase(Resistivity = 1 / Conductivity )so conductivity of metal decrease as increasing in temperature
The resistance of metals rises with increasing temperature. The resistance semiconducting materials falls with increasing temperature.
• ntc 'negative temperature coefficient': its resistance decreases as the temperature increases• ptc 'positive temperature coefficient': its resistance increases as the temperature increases
Magnetism does not affect the resistance of a conductor. The factors affecting resistance are the conductor's length, cross-sectional area, and resistivity. As resistivity is affected by temperature, temperature indirectly affects resistance. However, the changing magnetic field surrounding a conductor carrying an AC current causes the current to flow closer to the surface rather than being distributed throughout the cross-section of the conductor. The greater the frequency, the greater this effect. This has the equivalent effect of reducing the cross-sectional area of the conductor, causing its resistance to rise. This is misleadingly called the 'AC resistance' of the conductor!
most metals resistance increases with temperature